參數資料
型號: AD5310BRMZ-REEL
廠商: Analog Devices Inc
文件頁數: 5/16頁
文件大?。?/td> 0K
描述: IC DAC 10BIT R-R W/BUFF 8-MSOP
產品培訓模塊: Data Converter Fundamentals
DAC Architectures
產品變化通告: Product Discontinuance 27/Oct/2011
標準包裝: 3,000
設置時間: 6µs
位數: 10
數據接口: 串行
轉換器數目: 1
電壓電源: 單電源
功率耗散(最大): 1.25mW
工作溫度: -40°C ~ 105°C
安裝類型: 表面貼裝
封裝/外殼: 8-TSSOP,8-MSOP(0.118",3.00mm 寬)
供應商設備封裝: 8-MSOP
包裝: 帶卷 (TR)
輸出數目和類型: 1 電壓,單極;1 電壓,雙極
采樣率(每秒): 167k
Data Sheet
AD5310
Rev. B | Page 13 of 16
AD5310 to 68HC11/68L11 Interface
Figure 29 shows a serial interface between the AD5310 and the
68HC11/68L11 microcontroller. SCK of the 68HC11/68L11
drives the SCLK of the AD5310, while the MOSI output drives
the serial data line of the DAC. The SYNC signal is derived
from a port line (PC7). The setup conditions for correct
operation of this interface are as follows: the 68HC11/68L11
should be configured so that its CPOL bit is a 0 and its CPHA
bit is a 1. When data is being transmitted to the DAC, the SYNC
line is taken low (PC7). With this 68HC11/68L11 configuration,
data appearing on the MOSI output is valid on the falling edge
of SCK. Serial data from the 68HC11/68L11 is transmitted in
8-bit bytes with only eight falling clock edges occurring in the
transmit cycle. Data is transmitted MSB first. To load data to the
AD5310, PC7 is left low after the first eight bits are transferred,
a second serial write operation is performed to the DAC, and
PC7 is taken high at the end of this procedure.
Figure 29. AD5310 to 68HC11/68L11 Interface
AD5310 to 80C51/80L51 Interface
Figure 30 shows a serial interface between the AD5310 and the
80C51/80L51 microcontroller. The setup for the interface is as
follows: TXD of the 80C51/80L51 drives SCLK of the AD5310
while RXD drives the serial data line of the part. The SYNC
signal is again derived from a bit-programmable pin on the
port. In this case, Port Line P3.3 is used. When data is to be
transmitted to the AD5310, P3.3 is taken low. The 80C51/80L51
transmits data only in 8-bit bytes; therefore, only eight falling
clock edges occur in the transmit cycle. To load data to the
DAC, P3.3 is left low after the first eight bits are transmitted,
and a second write cycle is initiated to transmit the second byte
of data. P3.3 is taken high following the completion of this
cycle. The 80C51/ 80L51 outputs the serial data in a format that
has the LSB first. The AD5310 requires that the MSB of data be
received first. The 80C51/80L51 transmit routine should take
this into account.
Figure 30. AD5310 to 80C51/80L51 Interface
AD5310 to MICROWIRE Interface
Figure 31 shows an interface between the AD5310 and any
MICROWIRE-compatible device. Serial data is shifted out
on the falling edge of the serial clock and is clocked into the
AD5310 on the rising edge of the SK.
Figure 31. AD5310 to MICROWIRE Interface
相關PDF資料
PDF描述
VI-210-IW-S CONVERTER MOD DC/DC 5V 100W
AD5336BRUZ-REEL IC DAC 10BIT QUAD VOUT 28-TSSOP
VI-BN2-MX-F4 CONVERTER MOD DC/DC 15V 75W
VE-B1Z-IU-S CONVERTER MOD DC/DC 2V 80W
VI-BN2-MX-F3 CONVERTER MOD DC/DC 15V 75W
相關代理商/技術參數
參數描述
AD5310BRMZ-REEL7 功能描述:IC DAC 10BIT R-R W/BUFF 8-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 設計資源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 標準包裝:10,000 系列:- 設置時間:- 位數:12 數據接口:DSP,MICROWIRE?,QSPI?,串行,SPI? 轉換器數目:1 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 薄型,TSOT-23-8 供應商設備封裝:TSOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):2.7M
AD5310BRT 制造商:Analog Devices 功能描述:
AD5310BRT-500RL7 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 設計資源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 標準包裝:10,000 系列:- 設置時間:- 位數:12 數據接口:DSP,MICROWIRE?,QSPI?,串行,SPI? 轉換器數目:1 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 薄型,TSOT-23-8 供應商設備封裝:TSOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):2.7M
AD5310BRT-R2 功能描述:INTEGRATED CIRCUIT 制造商:analog devices inc. 系列:* 包裝:帶卷(TR) 零件狀態:最後搶購 封裝/外殼:SOT-23-6 供應商器件封裝:SOT-23-6 標準包裝:1
AD5310BRT-REEL 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP,8-MSOP(0.118",3.00mm 寬) 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓,單極 采樣率(每秒):* 產品目錄頁面:1398 (CN2011-ZH PDF)