- 您現在的位置：買賣IC網 > PDF目錄373875 > AD5300BRM-REEL7 (ANALOG DEVICES INC) +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 PDF資料下載
參數資料
| 型號： | AD5300BRM-REEL7 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | DAC |
| 英文描述： | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| 中文描述： | SERIAL INPUT LOADING, 4 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| 封裝： | MO-187AA, MSOP-8 |
| 文件頁數： | 9/12頁 |
| 文件大?。?/td> | 197K |
| 代理商： | AD5300BRM-REEL7 |
AD5300
–9–
REV. C
POWER-DOWN
CIRCUITRY
RESISTOR
NETWORK
V
OUT
RESISTOR
STRING DAC
AMPLIFIER
Figure 24. Output Stage During Power-Down
The bias generator, the output amplifier, the resistor string, and
other associated linear circuitry are all shut down when the
power-down mode is activated. However, the contents of the
DAC register are unaffected when in power-down. The time to
exit power-down is typically 2.5
μ
s for V
DD
= 5 V and 5
μ
s for
V
DD
= 3 V (see Figure 18).
MICROPROCESSOR INTERFACING
AD5300 to ADSP-2101/ADSP-2103 Interface
Figure 25 shows a serial interface between the AD5300 and the
ADSP-2101/ADSP-2103. The ADSP-2101/ADSP-2103 should
be set up to operate in the SPORT transmit alternate framing
mode. The ADSP-2101/ADSP-2103 SPORT is programmed
through the SPORT control register and should be configured
as follows: internal clock operation, active low framing, 16-bit
word length. Transmission is initiated by writing a word to the
Tx register after the SPORT has been enabled.
ADSP-2101/
ADSP-2103
*
DT
*
ADDITIONAL PINS OMITTED FOR CLARITY
SYNC
DIN
SCLK
AD5300
*
TFS
SCLK
Figure 25. AD5300 to ADSP-2101/ADSP-2103 Interface
DB15
DB0
SCLK
SYNC
DIN
DB15
DB0
VALID WRITE SEQUENCE, OUTPUT UPDATES
ON THE 16
FALLING EDGE
INVALID WRITE SEQUENCE:
SYNC
HIGH BEFORE 16
FALLING EDGE
Figure 23.
SYNC
Interrupt Facility
SYNC
Interrupt
In a normal write sequence, the
SYNC
line is kept low for at
least 16 falling edges of SCLK and the DAC is updated on the
16th falling edge. However, if
SYNC
is brought high before the
16th falling edge, this acts as an interrupt to the write sequence.
The shift register is reset and the write sequence is seen as
invalid; neither an update of the DAC register contents or a
change in the operating mode occurs—see Figure 23.
Power-On Reset
The AD5300 contains a power-on reset circuit that controls the
output voltage during power-up. The DAC register is filled with
zeros and the output voltage is 0 V. It remains there until
a valid write sequence is made to the DAC. This is useful in
applications where it is important to know the state of the out-
put of the DAC while it is in the process of powering up.
Power-Down Modes
The AD5300 contains four separate modes of operation. These
modes are software programmable by setting two bits (DB13
and DB12) in the control register. Table I shows how the state
of the bits corresponds to the mode of operation of the device.
Table I. Modes of Operation for the AD5300
DB13
DB12
Operating Mode
0
0
Normal Operation
Power-Down Modes
1 k
to GND
100 k
to GND
Three-State
0
1
1
1
0
1
When both bits are set to 0, the part works normally with its
normal power consumption of 140
μ
A at 5 V. However, for the
three power-down modes, the supply current falls to 200 nA at
5 V (50 nA at 3 V). Not only does the supply current fall but
the output stage is also internally switched from the output of
the amplifier to a resistor network of known values. This has an
advantage: the output impedance of the part is known while the
part is in power-down mode. There are three different options.
The output is connected internally to GND through a 1 k
resis-
tor or a 100 k
resistor, or it is left open-circuited (three-stated).
The output stage is illustrated in Figure 24.
相關PDF資料 |
PDF描述 |
|---|---|
| AD5300BRT-500RL7 | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| AD5300BRT-REEL | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| AD5300BRT-REEL7 | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| AD5300BRTZ-500RL7 | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| AD5300BRTZ-REEL | +2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD5300BRMZ | 功能描述:IC DAC 8BIT R-R 2.7-5.5V 8-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:3,000 系列:nanoDAC™ 設置時間:80µs 位數:18 數據接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 供應商設備封裝:SOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極 采樣率（每秒）:- 產品目錄頁面:784 (CN2011-ZH PDF) 配用:EVAL-AD5680EBZ-ND - BOARD EVAL FOR AD5680 其它名稱:AD5680BRJZ-2REEL7TR |
| AD5300BRMZ-REEL | 功能描述:IC DAC 8BIT R-R 2.7-5.5V 8MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:2,400 系列:- 設置時間:- 位數:18 數據接口:串行 轉換器數目:3 電壓電源:模擬和數字 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:36-TFBGA 供應商設備封裝:36-TFBGA 包裝:帶卷 (TR) 輸出數目和類型:* 采樣率（每秒）:* |
| AD5300BRMZ-REEL7 | 功能描述:IC DAC 8BIT R-R 2.7-5.5V 8MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 設計資源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 標準包裝:10,000 系列:- 設置時間:- 位數:12 數據接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 薄型，TSOT-23-8 供應商設備封裝:TSOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:2.7M |
| AD5300BRT | 制造商:AD 制造商全稱:Analog Devices 功能描述:+2.7 V to +5.5 V, 140 uA, Rail-to-Rail Output 8-Bit DAC in an SOT-23 |
| AD5300BRT-500RL7 | 功能描述:IC DAC 8BIT R-R 2.7-5.5V SOT23-6 RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 設計資源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 標準包裝:10,000 系列:- 設置時間:- 位數:12 數據接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 薄型，TSOT-23-8 供應商設備封裝:TSOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:2.7M |
發布緊急采購，3分鐘左右您將得到回復。