- 您現在的位置：買賣IC網 > PDF目錄9304 > AD5222BRZ10 (Analog Devices Inc)IC POT DGTL DUAL 128POS 14-SOIC PDF資料下載
參數資料
| 型號： | AD5222BRZ10 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 10/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC POT DGTL DUAL 128POS 14-SOIC |
| 標準包裝： | 56 |
| 接片： | 128 |
| 電阻（歐姆）： | 10k |
| 電路數： | 2 |
| 溫度系數： | 標準值 -35 ppm/°C |
| 存儲器類型： | 易失 |
| 接口： | 4 線串行（芯片選擇，遞增，增/減） |
| 電源電壓： | 2.7 V ~ 5.5 V，±2.3 V ~ 2.7 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 14-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 14-SOICN |
| 包裝： | 管件 |
AD5222
–9–
REV. 0
PROGRAMMING THE VARIABLE RESISTOR
Rheostat Operation
The nominal resistance of the RDAC between Terminals A and
B are available with values of 10 k
, 50 k, 100 k, and 1 M
The final three characters of the part number determine the
nominal resistance value, e.g., 10 k
= 10; 50 k = 50; 100 k
= 100; 1 M
= 1M. The nominal resistance (R
AB) of the VR
has 128 contact points accessed by the wiper terminal, plus the
B terminal contact. At power ON, the resistance from the wiper
to either end Terminal A or B is approximately equal. Pulsing
the CLK pin will increase the resistance from the wiper W to
Terminal B by one unit of RS resistance, see Figure 33. The
resistance RWB is determined by the number of pulses applied to
the clock pin. Each segment of the internal resistor string has a
nominal resistance value of RS = RAB/128, which becomes 78
in the case of the 10 k
AD5222BR10 product. Care should be
taken to limit the current flow between W and B in the direct
contact state (RWB code = 0) to a maximum value of 20 mA to
avoid degradation or possible destruction of the internal switch
contact.
Like the mechanical potentiometer the RDAC replaces, it is
totally symmetrical (see Figure 3). The resistance between the
wiper W and Terminal A also produces a digitally controlled
resistance RWA. When these terminals are used the B-terminal
should be tied to the wiper.
The typical part-to-part distribution of RBA is process-lot-
dependent having a
± 30% variation. The change in R
BA with
temperature has a –35 ppm/
°C temperature coefficient.
The RBA temperature coefficient increases as the wiper is pro-
grammed near the B-terminal due to the larger percentage
contribution of the wiper contact switch resistance, which has a
0.5%/
°C temperature coefficient. Figures 9 and 10 show the
effect of the wiper contact resistance as a function of code setting.
PROGRAMMING THE POTENTIOMETER DIVIDER
Voltage Output Operation
The digital potentiometer easily generates an output voltage
proportional to the input voltage applied to a given terminal.
For example connecting A-terminal to 5 V and B-terminal to
ground produces an output voltage at the wiper which can be
any value starting at zero volts up to 1 LSB less than 5 V. Each
LSB of voltage is equal to the voltage applied across Terminals
AB divided by the 128-position resolution of the potentiometer
divider. The general equation defining the output voltage with
respect to ground for any given input voltage applied to Termi-
nals AB is:
VW(D) = D/128
× V
AB + VB
(1)
D represents the current contents of the internal up/down counter.
Operation of the digital potentiometer in the divider mode
results in more accurate operation over temperature. Here the
output voltage is dependent on the ratio of the internal resistors
not the absolute value, therefore, the drift improves to 20 ppm/
°C.
相關PDF資料 |
PDF描述 |
|---|---|
| DS1100Z-35+ | IC DELAY LINE 5TAP 35NS 8-SOIC |
| VE-2WD-MW | CONVERTER MOD DC/DC 85V 100W |
| DS1100Z-60+ | IC DELAY LINE 5TAP 60NS 8-SOIC |
| DS1100Z-100+ | IC DELAY LINE 5TAP 100NS 8-SOIC |
| VE-2W4-MX-B1 | CONVERTER MOD DC/DC 48V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD5222BRZ100 | 功能描述:IC POT DGTL DUAL 128POS 14SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| AD5222BRZ10-REEL7 | 功能描述:IC POT DGTL DUAL 128POS 14SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR) |
| AD5222BRZ1M | 功能描述:IC DGTL POT 128POS 1M DL 14SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,300 系列:WiperLock™ 接片:257 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 150 ppm/°C 存儲器類型:易失 接口:3 線 SPI（芯片選擇） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-VDFN 裸露焊盤 供應商設備封裝:8-DFN-EP（3x3） 包裝:帶卷 (TR) |
| AD5222BRZ50 | 功能描述:IC POT DGTL DUAL 128POS 14SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,300 系列:WiperLock™ 接片:257 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 150 ppm/°C 存儲器類型:易失 接口:3 線 SPI（芯片選擇） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-VDFN 裸露焊盤 供應商設備封裝:8-DFN-EP（3x3） 包裝:帶卷 (TR) |
| AD5227 | 制造商:AD 制造商全稱:Analog Devices 功能描述:64-Position Up/Down Control Digital Potentiometer |
發布緊急采購，3分鐘左右您將得到回復。