- 您現在的位置：買賣IC網 > PDF目錄381234 > AAT3216IJS-2.8-T1 (Electronic Theatre Controls, Inc.) 150mA MicroPower⑩ LDO with PowerOK PDF資料下載
參數資料
| 型號： | AAT3216IJS-2.8-T1 |
| 廠商： | Electronic Theatre Controls, Inc. |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | 150mA MicroPower⑩ LDO with PowerOK |
| 中文描述： | ⑩微功耗150mA的LDO穩壓器與PowerOK |
| 文件頁數： | 13/16頁 |
| 文件大?。?/td> | 232K |
| 代理商： | AAT3216IJS-2.8-T1 |
AAT3216
150mA MicroPower LDO with PowerOK
3216.2004.01.0.94
13
Applications Information
High Peak Output Current Applications
Some applications require the LDO regulator to
operate at continuous nominal level with short
duration high current peaks. The duty cycles for
both output current levels must be taken into
account. To do so, one would first need to calcu-
late the power dissipation at the nominal continu-
ous level, then factor in the additional power dissi-
pation due to the short duration high current peaks.
For example, a 2.5V system using a AAT3216IGV-
2.5-T1 operates at a continuous 100mA load cur-
rent level and has short 150mAcurrent peaks. The
current peak occurs for 378μs out of a 4.61ms peri-
od. It will be assumed the input voltage is 4.2V.
First the current duty cycle in percent must be cal-
culated:
% Peak Duty Cycle: X/100 = 378μs/4.61ms
% Peak Duty Cycle = 8.2%
The LDO Regulator will be under the 100mA load
for 91.8% of the 4.61ms period and have 150mA
peaks occurring for 8.2% of the time. Next, the
continuous nominal power dissipation for the
100mA load should be determined then multiplied
by the duty cycle to conclude the actual power dis-
sipation over time.
P
D(MAX)
= (V
IN
- V
OUT
)I
OUT
+ (V
IN
x I
GND
)
P
D(100mA)
= (4.2V - 2.5V)100mA + (4.2V x 150μA)
P
D(100mA)
= 170.6mW
P
D(91.8%D/C)
= %DC x P
D(100mA)
P
D(91.8%D/C)
= 0.918 x 170.6mW
P
D(91.8%D/C)
= 156.6mW
The power dissipation for 100mA load occurring for
91.8% of the duty cycle will be 156.6mW. Now the
power dissipation for the remaining 8.2% of the
duty cycle at the 150mA load can be calculated:
P
D(MAX)
= (V
IN
- V
OUT
)I
OUT
+ (V
IN
x I
GND
)
P
D(150mA)
= (4.2V - 2.5V)150mA + (4.2V x 150mA)
P
D(150mA)
= 255.6mW
P
D(8.2%D/C)
= %DC x P
D(150mA)
P
D(8.2%D/C)
= 0.082 x 255.6mW
P
D(8.2%D/C)
= 21mW
The power dissipation for 150mA load occurring for
8.2% of the duty cycle will be 21mW. Finally, the
two power dissipation levels can summed to deter-
mine the total true power dissipation under the var-
ied load.
P
D(total)
= P
D(100mA)
+ P
D(150mA)
P
D(total)
= 156.6mW + 21mW
P
D(total)
= 177.6mW
The maximum power dissipation for the AAT3216
operating at an ambient temperature of 85°C is
211mW. The device in this example will have a total
power dissipation of 177.6mW. This is well within
the thermal limits for safe operation of the device.
相關PDF資料 |
PDF描述 |
|---|---|
| AAT3216IGV-3.3-T1 | 150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IGV-3.5-T1 | 150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IJS-1.2-T1 | 150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IJS-1.5-T1 | 150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IJS-2.0-T1 | 150mA MicroPower⑩ LDO with PowerOK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AAT3216IJS-3.0-T1 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IJS-3.3-T1 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:150mA MicroPower⑩ LDO with PowerOK |
| AAT3216IJS-3.5-T1 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:150mA MicroPower⑩ LDO with PowerOK |
| AAT3218 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:150mA MicroPower⑩ High Performance LDO |
| AAT3218IGV-1.2-T1 | 制造商:Skyworks Solutions Inc 功能描述:IC REG LDO 1.2V 0.15A SOT23-5 TR 制造商:Skyworks Solutions Inc 功能描述:VOLTAGE REGULATOR |
發布緊急采購，3分鐘左右您將得到回復。