- 您現在的位置：買賣IC網 > PDF目錄381233 > AAT3170 (Advanced Analog Technology,lnc.) High Current LED Flash Driver Charge Pump IC PDF資料下載
參數資料
| 型號： | AAT3170 |
| 廠商： | Advanced Analog Technology,lnc. |
| 英文描述： | High Current LED Flash Driver Charge Pump IC |
| 中文描述： | 高電流LED閃光燈驅動電荷泵芯片 |
| 文件頁數： | 14/15頁 |
| 文件大?。?/td> | 427K |
| 代理商： | AAT3170 |
AAT3170
High Current LED Flash Driver Charge Pump IC
14
3170.2006.11.1.1
PCB Layout
To achieve adequate electrical and thermal per-
formance, careful attention must be given to the
PCB layout. In the worst-case operating condition,
the chip must dissipate considerable power at full
load. Adequate heat-sinking must be achieved to
ensure intended operation.
Figure 3 illustrates an example of an adequate
PCB layout. The bottom of the package features an
exposed metal paddle. The exposed paddle acts,
thermally, to transfer heat from the chip and, elec-
trically, as a ground connection.
The junction-to-ambient thermal resistance (
θ
JA
) for
the package can be significantly reduced by follow-
ing a couple of important PCB design guidelines.
The PCB area directly underneath the package
should be plated so that the exposed paddle can
be mated to the top layer PCB copper during the
re-flow process. This area should also be connect-
ed to the top layer ground pour when available.
Further, multiple copper plated thru-holes should
be used to electrically and thermally connect the
top surface paddle area to additional ground
plane(s) and/or the bottom layer ground pour.
The chip ground is internally connected to both the
paddle and the GND pin. The GND pin conducts
large currents and it is important to minimize any
differences in potential that can result between the
GND pin and exposed paddle. It is good practice to
connect the GND pin to the exposed paddle area
using a trace as shown in Figure 3.
The flying capacitors C1 and C2 should be con-
nected close to the chip. Trace length should be
kept short to minimize path resistance and potential
coupling. The input and output capacitors should
also be placed as close to the chip as possible.
Figure 3: Example PCB Layout.
相關PDF資料 |
PDF描述 |
|---|---|
| AAT3170IWP-T1 | High Current LED Flash Driver Charge Pump IC |
| AAT3171 | High Current, High Efficiency Charge Pump with Auto-Timer |
| AAT3171IWP-T1 | High Current, High Efficiency Charge Pump with Auto-Timer |
| AAT3216IGV-3.0-T1 | 150mA MicroPower⑩ LDO with PowerOK |
| AAT3216 | 150mA MicroPower⑩ LDO with PowerOK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AAT3170_08 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:High Current LED Flash Driver Charge Pump IC |
| AAT3170IWP-T1 | 制造商:Skyworks Solutions Inc 功能描述:Voltage Regulators - Switching Regulators Hi Current LED Flash Drver Charge Pump IC |
| AAT3171 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:High Current, High Efficiency Charge Pump with Auto-Timer |
| AAT3171AIWP-T1 | 制造商:SKYWORKS SOLUTIONS INC 功能描述:800MA FLASH DRIVER CHPUMP 12TDFN TR |
| AAT3171IWP-T1 | 制造商:Skyworks Solutions Inc 功能描述:Voltage Regulators - Switching Regulators Hi Cur Hi Efficiency Charge Pump w/ Timer |
發布緊急采購，3分鐘左右您將得到回復。