參數資料
型號： A82C250
廠商： NXP Semiconductors N.V.
英文描述： CAN controller interface
中文描述： CAN控制器接口
文件頁數： 18/20頁
文件大小： 94K
代理商： A82C250
2000 Jan 13
18
Philips Semiconductors
Product specification
CAN controller interface
PCA82C250
Suitability of IC packages for wave, reflow and dipping soldering methods
Notes
1.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
These packages are not suitable for wave soldering as a solder joint between the printed-circuit board and heatsink
(at bottom version) can not be achieved, and as solder may stick to the heatsink (on top version).
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is only suitable for LQFP, QFP and TQFP packages with a pitch (e) equal to or larger than 0.8 mm;
it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is only suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
2.
3.
4.
5.
6.
MOUNTING
PACKAGE
SOLDERING METHOD
WAVE
REFLOW
(1)
DIPPING
suitable
suitable
Through-hole mount DBS, DIP, HDIP, SDIP, SIL
Surface mount
BGA, LFBGA, SQFP, TFBGA
HBCC, HLQFP, HSQFP, HSOP, HTQFP,
HTSSOP, SMS
PLCC
(4)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
suitable
(2)
not suitable
not suitable
(3)
suitable
suitable
not recommended
(4)(5)
not recommended
(6)
suitable
suitable
suitable
相關PDF資料
PDF描述
A8351601SERIES Bar Code Reader
A8396BH 16-Bit Microcontroller
C8395BH Single buffer (open drain)
LC8395BH 16-Bit Microcontroller
LN8396BH 16-Bit Microcontroller
相關代理商/技術參數
參數描述
A82C25063CP2 制造商:NXP Semiconductors 功能描述:82C25063CP2
A82DL1622 制造商:AMICC 制造商全稱:AMIC Technology 功能描述:Stacked Multi-Chip Package (MCP) Flash Memory and SRAM, A82DL16x2T(U) 16 Megabit (2Mx8 Bit/1Mx16 Bit) CMOS 3.3 Volt-only, Simultaneous Operation Flash
A82DL1622TG-70 制造商:AMICC 制造商全稱:AMIC Technology 功能描述:Stacked Multi-Chip Package (MCP) Flash Memory and SRAM, A82DL16x2T(U) 16 Megabit (2Mx8 Bit/1Mx16 Bit) CMOS 3.3 Volt-only, Simultaneous Operation Flash
A82DL1622TG-70F 制造商:AMICC 制造商全稱:AMIC Technology 功能描述:Stacked Multi-Chip Package (MCP) Flash Memory and SRAM, A82DL16x2T(U) 16 Megabit (2Mx8 Bit/1Mx16 Bit) CMOS 3.3 Volt-only, Simultaneous Operation Flash
A82DL1622TG-70I 制造商:AMICC 制造商全稱:AMIC Technology 功能描述:Stacked Multi-Chip Package (MCP) Flash Memory and SRAM, A82DL16x2T(U) 16 Megabit (2Mx8 Bit/1Mx16 Bit) CMOS 3.3 Volt-only, Simultaneous Operation Flash
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*