- 您現在的位置：買賣IC網 > PDF目錄210083 > A3CT-90B0-B PUSHBUTTON SWITCH, SPDT, ALTERNATE, 1A, 30VDC, PANEL MOUNT-THREADED PDF資料下載
參數資料
| 型號： | A3CT-90B0-B |
| 元件分類： | 開關 |
| 英文描述： | PUSHBUTTON SWITCH, SPDT, ALTERNATE, 1A, 30VDC, PANEL MOUNT-THREADED |
| 文件頁數： | 3/13頁 |
| 文件大?。?/td> | 253K |
| 代理商： | A3CT-90B0-B |
A3C
A3C
44
Installation
Mounting and Replacing the Pushbutton
Mounting Direction for the Pushbutton/Display and Lamp
Lighted Pushbutton Switch
Insert the Lamp (incandescent lamp or LED lamp) into the
Pushbutton so that the lamp guide fits into the wider gap
between the projections on the Pushbutton.
Indicator
With Indicators, the Lamp is inserted facing the opposite
direction (i.e., at 180
°) to that for Lighted Pushbutton
Switches.
Groove of the Display
Note:
1. Push the projections on the Lamp into the grooves on
the Pushbutton/Display.
2. The Lamp for Lighted Pushbutton Switches moves, but
the Lamp for Indicators is fixed.
Mounting Direction for the Pushbutton/Display and Switch
Insert the Pushbutton/Display into the Switch so that the lamp guide
is aligned with the non-projecting part of the Switch.
Apply a pressure between 9.8 and 24.5 N.
Projection of the Switch
Note:
1. The mounting direction for Indicators is 180
° to that for
Lighted Pushbutton Switches. Be sure to insert the Leg-
end Plate and other parts with the correct orientation.
2. If the terminals of the Lamp become bent, it may be
impossible to fit them into the lamp terminal holes.
Ensure that the terminals are straight when they are
inserted.
3. Take particular care about the mounting direction with
the round models (A3CT).
Removing the Pushbutton/Display
Hold the recessed portions on the cap of the Pushbutton and pull.
Recess
Note:
Do not use tools such as pliers to remove the Pushbutton as
this may damage the cap.
Panel Mounting
Insert the Switch from the front of the panel. Mount the mounting nut
from the terminal end of the Switch and tighten it.
There are projections on the terminal end of the Switch which may,
depending on the orientation, block the nut. In this case, turn the nut
until it is possible to mount it. Tighten the nut to a torque between
0.20 and 0.39 N
m.
If soldering is used, mount the mounting nut first. Lead wires and
mounds of solder may make it impossible to mount the nut after sol-
dering.
Panel
Mounting nut
Socket Mounting
After securing the Switch to the panel using the mounting nut, insert
the Socket into the Switch.
Align the positioning holes of the Socket with the projections of the
Switch before inserting the Socket.
Panel
Projection of the Switch
Positioning hole of the
Socket
相關PDF資料 |
PDF描述 |
|---|---|
| A10005MSMCGF | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT |
| A10005MSZGE | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED |
| A10005RNMCB | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
| A10014MNMCBF | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
| A10014MNMCBK | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| A3CT90B112EW | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:ASSEMBLED LIGHTED PUSHBUTTON |
| A3CT-90B1-12EW | 功能描述:按鈕開關 ASSEMBLED LIGHTED PUSHBUTTON RoHS:否 制造商:C&K Components 觸點形式:2 NC - 2 NO 開關功能:ON ? OFF 電流額定值:4 A 電壓額定值 AC:12 V to 250 V 電壓額定值 DC:12 V to 50 V 功率額定值: 安裝風格:Through Hole 照明:Illuminated 照明顏色:None IP 等級:IP 40 端接類型:Solder 觸點電鍍:Silver 執行器:Square 蓋顏色: 封裝: 可燃性等級:UL 94 V-0 |
| A3CT90B112EWNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSHBUTTON SPDT 1A 125V |
| A3CT90E106W | 制造商:Omron Electronic Components LLC 功能描述:Switch Push Button N.O./N.C. SPDT Round Button 0.1A 125VAC 30VDC Momentary Contact Solder Panel Mount |
| A3CT90F0A | 制造商:Omron Corporation 功能描述:Switch Push Button N.O./N.C. SPDT Round Button 0.1A 125VAC 30VDC Alternate Contact Solder Panel Mount |
發布緊急采購，3分鐘左右您將得到回復。