![](http://datasheet.mmic.net.cn/230000/9952-1100-23_datasheet_15574258/9952-1100-23_2.png)
M/A-COM, Inc.
North America:
Tel. (800) 366-2266
Fax (800) 618-8883
I
Asia/Pacific:
Tel. +85 2 2375 0618
Fax +85 2 2375 0350
I
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020
2
Specifications Subject to Change Without Notice.
Materials
OSMT Plug
Housing:
Contacts:
Polyphenylene Sulfide
Copper alloy
OSMT Cable Jack
Outer Contact:
Inner Contact:
Dielectric:
Beryllium Copper
Beryllium Copper
Polypropylene, GF
Finish
Plug and cable jack - Contacts: Gold plate over nickel plate
Frequency
dc - 6 GHz
Nominal Impedance
50 ohms
Voltage Rating
250 Volts (VRMS Maximum) @ Sea Level
VSWR (Mated Connectors Only)
1.20:1 Maximum @ 2 GHz
1.40:1 Maximum @ 6 GHz
Insulation Resistance
1000 Megohms Minimum
Dielectric Withstanding Voltage
500 Volts (VRMS Minimum) @ Sea Level
Contact Resistance (Connectors Only)
Center Contact
Outer Contact
Insertion Loss (Connectors Only)
15 milliohms Maximum
10 milliohms Maximum
.15dB Max. @ 6 GHz
Connector Durability
Tape/Reel Packaging (Plug)
Force to Engage
Force to Disengage
100 mating cycles
12mm per EIA-481
4.0 lbs. Max. (2.5 lbs. typ.)
4.5 lbs. Max. (3.0 lbs. typ.)
Temperature Rating (Mated Pair)
PVC Flexible Cable:
FEP Flexible Cable:
-40°C (-40°F) to +105°C (221°F)
-40°C (-40°F) to +125°C (257°F)
Resistance to Solder Heat
Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed
260°C for 3 minutes.
Requirement
General
Detail
OSMT
Specifications
Electrical
Mechanical
Environmental
Cable Specifications
1
Materials
Jacket:
Shield:
PVC Flexible Cable (105°C)
Polyvinyl Chloride
Silver Plated Copper Wire,
38 AWG, 90% Min. Coverage
PFA or FEP
Silver Plated Copper Clad Steel,
30 AWG
FEP Flexible Cable (200°C)
Flourinated Ethylene Propylene
Silver Plated Copper Wire,
38 AWG, 90% Min. Coverage
PFA or FEP
Silver Plated Copper Clad Steel,
30 AWG
Dielectric:
Center Conductor:
Minimum Bend Radius
9.5mm (.375 inch)
9.5mm (.375 inch)
Insertion Loss (PVC and FEP Cable Only)
0.4 dB/ft., 1.3d B/m @ 500 MHz
0.6 dB/ft., 2.0 dB/m @ 1 GHz
0.9 dB/ft., 3.0 dB/m @ 2 GHz
1.3 dB/ft., 4.3 dB/m @ 4 GHz
1.7 dB/ft., 5.6 dB/m @ 6 GHz
Center Conductor Resistance
(PVC and FEP Cable Only)
.26 Ohms per foot average.
1. M/A-COM has design control and all data contained herein is subject to change without notice.
OUTER
JACKET
CENTER
CONDUCTOR
DIELECTRIC
1.9 mm
(.075) DIA.
(.0.73 mm
SHIELD
(BRAID)
.254 mm (.010)
DIA. REF
Decimal inch equivalents are shown in parentheses for general information only.