參數資料
型號: 95678-004-00
英文描述: BUCHSE RJ45 PCB HOR GESCHIRMT 4REIHIG
中文描述: 比克澤個RJ45賀永GESCHIRMT 4REIHIG板
文件頁數: 15/18頁
文件大?。?/td> 81K
代理商: 95678-004-00
TYPE
PRODUCT SPECIFICATION
NUMBER
GS-12-083
TITLE
Single and Multi-Port Modular Jack Assemblies
PAGE
REVISION
15 of 18
F
AUTHORIZED BY
DATE
B. Brubaker
27 Mar 01
CLASSIFICATION
UNRESTRICTED
Copyright 2001 FCI USA, INC.
Form E-3334
02/12/01
GS-01-001
8.9
Six position plug stress test
8.9.1
Eight position, non-keyed jacks with stamped leadframe style terminals shall be
capable of withstanding mating with a six position FCC approved plug and not suffer
overstress damage to pins #1 and #8. After plugging ten times with a six position plug,
pins 1 and 8 shall maintain 70 grams minimum normal force when measured with an
FCC minimum sized plug.
9.0
QUALITY ASSURANCE PROVISIONS
9.1
Equipment Calibration. All test equipment and inspection facilities used in the performance of
any test shall be maintained in a calibration system in accordance with MIL-C-45662 and ISO
9000.
9.2
Inspection Conditions. Unless otherwise specified herein, all inspections shall be performed
under the following ambient conditions:
a) Temperature: 25 +/- 5 degrees C
b) Relative Humidity: 30% to 60%
c) Barometric Pressure: Local ambient
9.3
Sample Quantify and Description. Unless specified otherwise, the sample quantity for each Test
Group in Table 1 shall consist of a minimum of thirty (30) contacts. The 30 contacts shall be
selected from a minimum of three (3) connectors. In connector families where conditions such as
size, type, plating, material type, etc. would be expected to affect test results, samples should
be included to evaluate those conditions in the affected Test Groups of Table 1.
9.3.1
Results obtained from testing multiport assemblies are applicable to similar products of
other number of ports. Multiport assemblies of representative size (typically 4, 6, 8, or
12 ports) shall be used for mechanical and environmental tests assigned to Group 1.
Other test groups can utilize single or multiport assemblies as practical.
9.4
Acceptance
9.4.1
Electrical and mechanical requirements placed on test samples as indicated in
paragraphs 6.0 and 7.0 shall be established from test data using appropriate statistical
techniques or shall otherwise be customer specified, and all samples tested in
accordance with this product specification shall meet the stated requirements.
9.4.2
Failures attributed to equipment, test set-up, or operator error shall not disqualify the
product. If product failure occurs, corrective action shall be taken and samples
resubmitted for qualification.
相關PDF資料
PDF描述
95678-006-00 BUCHSE RJ45 PCB HOR GESCHIRMT 6REIHIG
95725 IDENT READ HEAD
95729 IDENT READ HEAD BASE
9575 RELAISSOCKEL
9585 RELAISFASSUNG DIN 4031 RELAIS
相關代理商/技術參數
參數描述
95678-00400LF 功能描述:以太網和電信連接器 95678-00400LF-RA CAT 5 GANGJACK ASSY RoHS:否 制造商:Pulse 產品:Modular Jacks 性能類別: USOC 代碼:RJ45 位置/觸點數量: 安裝風格:Through Hole 端口數量:1 x 1 型式:Female 屏蔽: 電流額定值: 電壓額定值: 觸點電鍍: 外殼材料:Thermoplastic IP 等級:
95678-004-00LF 功能描述:以太網和電信連接器 32P 4PORTS CAT 5 RoHS:否 制造商:Pulse 產品:Modular Jacks 性能類別: USOC 代碼:RJ45 位置/觸點數量: 安裝風格:Through Hole 端口數量:1 x 1 型式:Female 屏蔽: 電流額定值: 電壓額定值: 觸點電鍍: 外殼材料:Thermoplastic IP 等級:
95678-004-02 功能描述:以太網和電信連接器 95678-004-02-RA CAT 5 G/J ASSY RoHS:否 制造商:Pulse 產品:Modular Jacks 性能類別: USOC 代碼:RJ45 位置/觸點數量: 安裝風格:Through Hole 端口數量:1 x 1 型式:Female 屏蔽: 電流額定值: 電壓額定值: 觸點電鍍: 外殼材料:Thermoplastic IP 等級:
95678-004-10 制造商:FCI 功能描述:CONN TEL/TELC F 32 POS 2.54MM SLDR RA TH 32TERM 4PORT CAT 5 - Rail/Tube
95678-00410LF 功能描述:以太網和電信連接器 Right Angle Cat5 Modular Jack Assembly 8 Pos Shielded (1x4), 32 Positions RoHS:否 制造商:Pulse 產品:Modular Jacks 性能類別: USOC 代碼:RJ45 位置/觸點數量: 安裝風格:Through Hole 端口數量:1 x 1 型式:Female 屏蔽: 電流額定值: 電壓額定值: 觸點電鍍: 外殼材料:Thermoplastic IP 等級: