The Corning Cable Systems ST compatible and SC Fast Cure Glass-Insert Multimode Connector (GIC) is designed to
incorporate all the polishing advantages of the glass-in-ceramic ferrule with the quick cure installation of anaerobic adhe-
sives. The parts have been pre-assembled to save you time and to improve productivity. The ferrule holder is metal,
allowing the use of anaerobic adhesive without degradation of material. The Fast Cure GIC can be assembled on 900 m
or 3 mm fiber.
The anaerobic adhesive uses a two-part epoxy process. The adhesive is first injected in the ferrule. The fiber is then
dipped into the primer and inserted into the connector. Curing takes one minute without the use of lamps or ovens.
With the glass-in-ceramic ferrule, the anaerobic adhesive adheres uniformly to the inside of the glass-insert, ensuring
proper curing through the entire length of the ferrule, including the tip.
The Corning Cable Systems ST compatible and SC glass-insert multimode connectors can be completely assembled and
polished in less than 3 minutes.
The crimp-on strain-relief requires only one additional tool.
s Ideal for main, intermediate, or
horizontal cross-connects
s Initial installations
CCA72
s Same features and level of quality as Corning Cable Systems’ existing
glass-insert connector:
Durability
≥ 500 rematings
Robust polishing
Minimal training
Note: This connector is not UV-curable.
FE ATU R ES AN D B E N EFI TS
APPLIC AT IONS
Corning Cable Systems
Fiber Cabling Solutions for Premises Networks
Fast Cure, Glass-Insert
Anaerobic Connectors
s New fast cure anaerobic adhesive;
does not require electrical power
s Glass-in-ceramic ferrule; ensures
proper curing
s Reduced installation time; less than
3 minutes assembled and polished
s Typical loss of 0.2 dB with physical
contact polish
A LANscape Solutions Product