
FDDI-1
Connector
for Factory Installation
Corning Cable Systems LLC PO Box 489 Hickory, NC 28603-0489 USA 1-800-743-2675 FAX: 828-327-5973
International: 828-327-5000 http://www.corning.com/cablesystems. Corning Cable Systems reserves the right to
improve, enhance, and modify the features and specifications of Corning Cable Systems’ products without prior notification.
DIB is a registered trademark of Corning Cable Systems LLC. All other trademarks are the properties of their respective owners.
1995, 2000 Corning Cable Systems. All Rights Reserved. Printed in USA. CCA-47C / October 2000 / 1.5M
Specifications
Parameter
Specification
Test Condition
Insertion Loss
Typical 0.3 dB
FOTP-171
Durability
< 0.2 dB change
500 matings, cleaned every 25, FOTP-21
Tensile
< 0.1 dB change
50 lb, load applied for 60 seconds
Thermal Shock
< 0.2 dB change
-40 to +60C, less than 1 minute transition, 10 cycles, FOTP-6
Temperature Cycling
< 0.2 dB change
-40 to +80C, 50 cycles
Return Loss
< -30 dB
FOTP-107
Humidity
< 0.2 dB change
60C 95% RH, 504 hours, FOTP-5
Thermal Aging
< 0.2 dB change
85C, 504 hours, FOTP-4
Impact
< 0.2 dB change
FOTP-2, Method B
Active Cable/
Connector Retention
< 0.1 dB change
20 lb for 60 seconds, active to power meter
Ordering Information
Part Number
Description
95-100-15-BP
FDDI-1 connector for factory installation; bulk packaged in quantities of 100
Accessories
3201012-01
Aramid Yarn Crimp Tool
2104211-01
Polishing Puck (polishes 2 ferrules simultaneously)
2104212-01
Polishing Adapter
2104213-01
FDDI-1 Oven Block Assembly
2104025-01
110°C Oven for Curing
1101024-01
Heat-Cured Epoxy, BiPax
1101026-01
Heat-Cured Epoxy, UniPax
2104077-01
Overnight Cure Epoxy, BiPax
100335-01
Syringes
2104069-01
Syringe Tip
54-005-10
Ferrule Block Assembly for Rework