參數資料
型號： 935208580557
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
封裝： 10 X 10 X 1.75 MM, PLASTIC, QFP-44
文件頁數： 50/80頁
文件大小： 446K
代理商： 935208580557
1997 Dec 15
54
Philips Semiconductors
Product specication
8-bit microcontrollers
P83C524; P80C528; P83C528
Notes to the DC characteristics
1. Conditions for:
a) The operating supply current is measured with all output pins disconnected; XTAL1 driven with tr =tf = 5 ns;
VIL =VSS +0.5 V; VIH =VDD 0.5 V; XTAL2 not connected; EA = RST = Port 0 = P1.6 = P1.7 = VDD;
the WDT is disabled (by the external RESET).
2. Conditions for:
a) The Idle mode supply current is measured with all output pins disconnected; XTAL1 driven with tr =tf = 5 ns;
VIL =VSS +0.5 V; VIH =VDD 0.5 V; XTAL2 not connected; the WDT is disabled; EA = RST = VSS;
Port 0 = P1.6 = P1.7 = VDD.
3. Conditions for:
a) The Power-down current is measured with all output pins disconnected; XTAL2 not connected;
WDT is disabled; EA = RST = XTAL1 = VSS; Port 0 = P1.6 = P1.7 = VDD.
4. Capacitive loading on Port 0 and Port 2 may cause spurious noise pulses to be superimposed on the LOW level
output voltage of ALE, Port 1 and Port 3. The noise is due to external bus capacitance discharging into the Port 0
and Port 2 pins when these pins make a HIGH-to-LOW transition during bus operations. In the worst cases
(capacitive loading
> 100pF), the noise pulse on the ALE line may exceed 0.8 V. In such cases it may be desirable
to qualify ALE with a Schmitt Trigger, or use an address latch with a Schmitt Trigger STROBE input.
5. Capacitive loading on Port 0 and Port 2 may cause the HIGH level output voltage on ALE and PSEN to momentarily
fall below the 0.9 VDD specification when the address bits are stabilizing.
6. The input threshold voltage of P1.6 and P1.7 (SIO1) meets the I2C specification, so a voltage below 0.3 VDD will be
recognized as a logic 0 while an input above 0.7 VDD will be recognized as a logic 1.
7. Under steady state (non-transient) conditions, IOL must be externally limited as follows:
a) Maximum IOL per port pin:10 mA.
b) Maximum IOL per 8-bit port:- Port 0: 26 mA; Ports 1, 2 and 3: 15 mA.
c) Maximum total IOL for all output pins: 71 mA. If IOL exceeds the test condition,
VOL may exceed the related specification.
d) Pins are not guaranteed to sink current greater than the listed test conditions.
8. IDD max. at other frequencies can be derived from Fig.26 where f is the external oscillator frequency in MHz;
IDD max. is given in mA.
VOH1
HIGH level output voltage
Port0in in external bus mode,
ALE, PSEN, RST
IOH = 800 A;
VDD =5V± 10%
IOH = 300 A;
IOH = 80 A; note 5
2.4
0.75VDD
0.9VDD
V
RRST
RST pull
down resistor
50
150
k
CI/O
I/O pin capacitance
test frequency = 1 MHz;
Tamb =25 °C
10
pF
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
相關PDF資料
PDF描述
935208540118 8-BIT, 16 MHz, MICROCONTROLLER, PQCC44
935263366112 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
935045620112 8-BIT, MICROCONTROLLER, PQCC44
935208570557 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
935222930112 8-BIT, 24 MHz, MICROCONTROLLER, PQCC44
相關代理商/技術參數
參數描述
9-352112-9 制造商:TE Connectivity 功能描述:Z-PACK SHLD.LOWER C - Bulk
9-352151-3 制造商:TE Connectivity 功能描述:ZP,22C.F.U.SH.44MMW/O LUBE - Tape and Reel 制造商:TE CONNECTIVITY 功能描述:ZP,22C.F.U.SH.44MMW/O LUBE
9-352151-9 制造商:TE Connectivity 功能描述:ZP,22C.F.U.SH.44MM - Bulk
935218-17 制造商:JANCO 功能描述:935218-17
9352370001 功能描述:HEAT SHRINK SLEEVE RoHS:是 類別:線纜，導線 - 管理 >> 標簽，標記 系列:HT-SCE 標準包裝:250 系列:CM-SCE 標簽類型:標準 標簽尺寸:2.00" x 0.25"（50.8mm x 6.4mm） 顏色:白 材質:聚烯烴 適用于相關產品:點陣打印機 包裝:* 工作溫度:-55°C ~ 135°C 其它名稱:A105291CM-SCE-TP-1/4-4H-9
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*