
E
S
ELH0041G/883/8508701ZX
0.1 Amp Power Operational Amplifier
Note:
All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. Patent pending.
1989 Elantec, Inc.
Features
#
High output currentD200 mA
#
Excellent open-loop
gainD106 dB
#
Low offset voltageD1 mV
#
Wide full power
bandwidthD20 kHz
#
High slew rateD3 V/
m
s
#
MIL-STD-883 devices 100%
manufactured in U.S.A.
Ordering Information
Part No.
Temp. Range Pkg. Outline
Y
ELH0041G/883B
b
55
§
C to
a
125
§
C TO-8 MDP002
8508701ZX is the SMD version of this device.
Connection Diagram
0041–1
Top View
General Description
The ELH0041 are general purpose operational amplifiers capa-
ble of delivering large output currents not usually associated
with conventional IC op amps; the ELH0041 delivers currents
of 200 mA at voltage levels closely approaching the available
power supplies. In addition, both the inputs and outputs are
protected against overload. These devices are compensated with
a single external capacitor and are free of any unusual oscilla-
tion or latch-up problems.
For applications requiring output currents in excess of 1A, see
the ELH0021 data sheet.
The excellent input characteristics and high output capability
of the ELH0041 make it an ideal choice for power applications
such as DC servos, capstan drivers, deflection yoke drivers, and
programmable power supplies.
The ELH0041 is particularly suited for applications such as
torque drivers for inertial guidance systems, diddle yoke drivers
for alphanumeric CRT displays, cable drivers, and programma-
ble power supplies for automatic test equipment.
Elantec facilities comply with MIL-I-45208A and other applica-
ble quality specifications. Elantec’s Military devices are 100%
fabricated and assembled in our rigidly controlled, ultra-clean
facilities in Milpitas, California. For additional information on
Elantec’s Quality and Reliability Assurance policy and proce-
dures request brochure QRA-1.
Burn-In Circuit
0041–2
Equivalent Schematic
0041–3