316L SS Pressure Sensor
Model 85 5psi
ISO – Standard
1-65
October 2001
PERFORMANCE SPECIFICATIONS
All parameters measured at 1.5mA drive and at 25°C after 10 second warm up, unless otherwise specified. Unless specifically indicated, only those parameters
indicated as tested are verified on each part. Parameters are specified for the compensated version only.
Notes
1.
For amplified output circuits, 3.012V ± 1% interchangeability with gain
set resistor. See Application Note TN-003.
Measured at vacuum for absolute (A), ambient for gage (G).
Best fit straight line.
Over Temperature range: 0°C to 50°C Span with respect to +25°C.
Guarantees output/input ratiometricity.
2.
3.
4.
5.
6.
7.
8.
Load resistance to reduce measurement errors due to output loading.
Between case and sensing element.
Maximum temperature range for product with standard cable and
connector is –20°C to +105°C.
Weight depends upon configuration (cable, connector, pressure fitting).
10. For gage units used at pressures below atmosphere, the span accuracy
is not guaranteed.
9.
ORDERING INFORMATION
CONNECTIONS
APPLICATION SCHEMATIC
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Full Scale Output Span
Zero Offset
Pressure Non-linearity
Pressure Hysteresis
Input Resistance
Output Resistance
Temperature Error - Span
Temperature Error - Zero
Thermal Hysteresis - Span
Thermal Hysteresis - Zero
Long Term Stability - Offset
Long Term Stability - Span
Supply Current
Output Load Resistance
Insulation Resistance (50 VDC)
Pressure Overload
Compensated Operating Temperature
Operating Temperature Range
Storage Temperature Range
Media - Pressure Port
75
-1
120
0
150
1
0.10
0.1
6,000
25000
0.75
1.5
0.25
0.25
mV
mV
1, 2
2
3
-0.10
-0.1
3,500
4000
-0.75
-1.5
-0.25
-0.25
% Span
% Span
% Span
% Span
% Span
% Span
±% Span/yr.
±% Span/yr.
mA
M
M
Rated
4
4
4
4
0.1
0.1
1.5
0.5
5
50
2.0
5
6
7
3X
0°C to 50°C
–40°C to +125°C
–50°C to +125°C
Liquids and Gases compatible with 316L Stainless Steel
Compatible with Silicon, Pyrex, Gold, Fluorosilicone Rubber and
316L Stainless Steel
13 g
8
8
8
Media - Reference Port
Weight
9
PAD NO. / CABLE
FUNCTION
1
2
3
4
5
6
+OUT
-EX
+EX
-OUT
GAIN
GAIN
85 - 005 G - 0 C T
Vent (T = Tube, Blank is standard = No Tube)
Electrical (C = Ribbon Cable with Connector,
P = Solder Pads, R = Ribbon Cable,
L = Leads, Uncompensated)
Pressure Port (0 = Weldable, No Thread,
4 = 1/4 - 18
Pressure Port (
Pressure Port (
8 = 1/8 - 27 NPT)
Type (A=Absolute, G=Gage)
Pressure Range (5 psi)
Model
Electrical (
Electrical (
NPT, 5 = 1/4 - 19 BSP,
Feel free to contact customer service with any questions at
Toll free 1(800)745-8008; Phone (757)766-1500; Fax (757)766-4297