參數資料
型號： 7P320ATA2500C25
英文描述： Flash Memory Card(320M位閃速存儲器卡)
中文描述： 閃存卡（320米位閃速存儲器卡）
文件頁數： 39/62頁
文件大小： 626K
代理商： 7P320ATA2500C25
7PxxxATA25xxC25
June 2000 Rev. 1 – ECO #12936
39
White Electronic Designs Corporation
(508) 366-5151
6. Idle (code: E3H or 97H): This command causes the Card to set BSY, enter the Idle mode, clear BSY
and generate an interrupt. If the sector count is non-zero, the automatic power down mode is enabled.
If the sector count is zero, the automatic power down mode is disabled.
7. Idle Immediate (code: E1H or 95H): This command causes the Card to set BSY, enter the Idle (Read)
mode, clear BSY and generate an interrupt.
8. Initialize Drive Parameters (code: 91H): This command enables the host to set the number of sectors
per track and the number of heads per cylinder.
9. Read Buffer (code: E4H): This command enables the host to read the current contents of the card's
sector buffer.
10. Read Multiple (code: C4H): This command performs similarly to the Read Sectors command.
Interrupts are not generated on each sector, but on the transfer of a block which contains the number of
sectors defined by a Set Multiple command.
11. Read Long Sector (code: 22H or 23H): This command performs similarly to the Read Sector(s)
command except that it returns 516 bytes of data instead of 512 bytes.
12. Read Sector(s) (code: 20H, 21H): This command reads from 1 to 256 sectors as specified in the
Sector Count register. A sector count of 0 requests 256 sectors. The transfer begins at the sector
specified in the Sector Number register.
13. Read Verify Sector (code: 40H or 41H): This command is identical to the Read Sectors command,
except that DRQ is never set and no data is transferred to the host .
14. Recalibrate (code: 1XH): This command is effectively a NOP command to the Card and is provided
for compatibility purposes.
15. Request Sense (code: 03H): This command requests an extended error code after a command ends
with an error.
16. Seek (code: 7XH): This command is effectively a NOP command to the Card although it does
perform a range check.
17. Set Features (code: EFH): This command is used by the host to establish or select certain features.
Feature
Operation
01H
Enable 8-bit data transfers.
55H
Disable Read Look Ahead.
66H
Disable Power on Reset (POR) establishment of defaults at Soft Reset.
81H
Enable 8-bit data transfers.
BBH
4 bytes of data apply on Read/Write Long commands.
CCH
Enable Power on Reset (POR) establishment of defaults at Soft Reset.
18. Set Multiple Mode (code: C6H): This command enables the Card to perform Read and Write Multiple
operations and establishes the block count for these commands.
19. Set Sleep Mode (code: E6H or 99H): This command causes the Card to set BSY, enter the Sleep
mode, clear BSY and generate an interrupt.
20. Stand By (code: E2H or 96H): This command causes the Card to set BSY, enter the Sleep mode
(which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately.
相關PDF資料
PDF描述
7P448ATA2500C25 Flash Memory Card(448M位閃速存儲器卡)
7P512ATA2500C25 Flash Memory Card(512M位閃速存儲器卡)
7P640ATA2503C25 Flash Memory Card(640M位閃速存儲器卡)
7P1G0ATA2514C25 Flash Memory Card(1024M位閃速存儲器卡)
7S PNP 500 mA, 50 V resistor-equipped transistors R1 = 2.2 kW, R2 = 2.2 kW
相關代理商/技術參數
參數描述
7P351V330J042 制造商:CDE 制造商全稱:Cornell Dubilier Electronics 功能描述:Type 7P 55 ∑C Photoflash, High-Energy, Long Life, Aluminum
7P351V330K022 制造商:Cornell Dubilier Electronics 功能描述:ALUMINUM ELECTROLYTIC CAPACITOR
7P351V360A012 制造商:CDE 制造商全稱:Cornell Dubilier Electronics 功能描述:Type 7P 55 ∑C Photoflash, High-Energy, Long Life, Aluminum
7P351V360K022 制造商:CDE 制造商全稱:Cornell Dubilier Electronics 功能描述:Type 7P 55 ∑C Photoflash, High-Energy, Long Life, Aluminum
7P-38.400MBP-T 功能描述:38.4MHz Clipped Sine Wave, CMOS TCXO Oscillator Surface Mount 2.7 V ~ 5.5 V 10mA 制造商:txc corporation 系列:7P 包裝:剪切帶（CT） 零件狀態:有效 類型:TCXO 頻率:38.4MHz 功能:- 輸出:削峰正弦波，CMOS 電壓 - 電源:2.7 V ~ 5.5 V 頻率穩定度:±280ppb 工作溫度:-40°C ~ 85°C 電流 - 電源（最大值）:10mA 等級:- 安裝類型:表面貼裝 大小/尺寸:0.197" 長 x 0.126" 寬（5.00mm x 3.20mm） 高度:0.065"（1.65mm） 封裝/外殼:6-SMD，無引線（DFN，LCC） 電流 - 電源（禁用）（最大值）:- 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*