- 您現在的位置：買賣IC網 > PDF目錄358652 > 74HC240D-T Dual 4-Bit Inverting Buffer/Driver PDF資料下載
參數資料
| 型號： | 74HC240D-T |
| 英文描述： | Dual 4-Bit Inverting Buffer/Driver |
| 中文描述： | 雙4位反向緩沖器/驅動器 |
| 文件頁數： | 14/16頁 |
| 文件大小： | 83K |
| 代理商： | 74HC240D-T |
2003 May 14
14
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74HC2G02; 74HCT2G02
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1.
For more detailed information on the BGA packages refer to the“(LF)BGA Application Note” (AN01026); order a copy
from your Philips Semiconductors sales office.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
2.
3.
4.
5.
6.
PACKAGE
(1)
SOLDERING METHOD
WAVE
REFLOW
(2)
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA
DHVQFN, HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP,
HTSSOP, HVQFN, HVSON, SMS
PLCC
(4)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
not suitable
not suitable
(3)
suitable
suitable
suitable
not recommended
(4)(5)
not recommended
(6)
suitable
suitable
suitable
相關PDF資料 |
PDF描述 |
|---|---|
| 74HCT7245D-T | Single 8-bit Bus Transceiver |
| 74HC297D-T | Analog Phase-Locked Loop |
| 74HC283D-T | Binary Adder |
| 74HC280D-T | SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits |
| 74HC27D-T | Triple 3-input NOR Gate |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 74HC240FPV-E | 制造商:Renesas Electronics 功能描述:Cut Tape 制造商:Renesas 功能描述:Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin SOP Tube |
| 74HC240HAR9228 | 制造商:HAR 功能描述:74HC240 |
| 74HC240N | 功能描述:緩沖器和線路驅動器 OCTAL 3-S BUFFER INV RoHS:否 制造商:Micrel 輸入線路數量:1 輸出線路數量:2 極性:Non-Inverting 電源電壓-最大:+/- 5.5 V 電源電壓-最小:+/- 2.37 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Reel |
| 74HC240N,652 | 功能描述:緩沖器和線路驅動器 OCTAL 3-S BUFFER INV RoHS:否 制造商:Micrel 輸入線路數量:1 輸出線路數量:2 極性:Non-Inverting 電源電壓-最大:+/- 5.5 V 電源電壓-最小:+/- 2.37 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Reel |
| 74HC240N652 | 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP Semiconductors 功能描述:IC OCTAL BUFFER/ DRIVER 3STATE DIP-20 制造商:NXP 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。