- 您現在的位置：買賣IC網 > PDF目錄158220 > 7343/B1C2-APSA/MS (EVERLIGHT ELECTRONICS CO LTD) T-1 3/4 SINGLE COLOR LED, BLUE, 5 mm PDF資料下載
參數資料
| 型號： | 7343/B1C2-APSA/MS |
| 廠商： | EVERLIGHT ELECTRONICS CO LTD |
| 元件分類： | LED |
| 英文描述： | T-1 3/4 SINGLE COLOR LED, BLUE, 5 mm |
| 封裝： | ROHS COMPLIANT, PLASTIC PACKAGE-2 |
| 文件頁數： | 8/10頁 |
| 文件大?。?/td> | 119K |
| 代理商： | 7343/B1C2-APSA/MS |
Technical Data Sheet
7343/B1C2-APSA/MS
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1
Page: 7 of 10
Device Number : DLE-0001413
Prepared date:05-11-2009
Prepared by: Grace Shen
Notes
1. Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of
the epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may
damage the LED’s characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures
may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the
lead position of the LED. If the LEDs are mounted with stress at the leads, it causes
deterioration of the epoxy resin and this will degrade the LEDs.
2. Storage
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from
Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or
more, they can be stored for a year in a sealed container with a nitrogen atmosphere and
moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity
environments where condensation can occur.
3. Soldering
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is
recommended.
相關PDF資料 |
PDF描述 |
|---|---|
| 73442-084LF | 4 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
| 73442-086LF | 6 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
| 73442-088LF | 8 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
| 73442-384LF | 4 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
| 73442-386LF | 6 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 7343-B1C2-APSA-X-MS | 功能描述:標準LED-通孔 5mm LED RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| 7343-B-440-AL-6 | 制造商:RAF Electronic Hardware 功能描述: |
| 7343-B-440-AL-7 | 制造商:RAF Electronic Hardware 功能描述: |
| 7343-G1C2-ASVA | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:Specially designed for applications |
| 7343-G1C2-ASVA/MS | 制造商:Everlight Electronics Co 功能描述:7343/G1C2-ASVA/MS |
發布緊急采購，3分鐘左右您將得到回復。