- 您現在的位置：買賣IC網 > PDF目錄298489 > 711-06E22-10S(416) (AMPHENOL CORP) 10 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG PDF資料下載
參數資料
| 型號： | 711-06E22-10S(416) |
| 廠商： | AMPHENOL CORP |
| 元件分類： | 圓形連接器 |
| 英文描述： | 10 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
| 文件頁數： | 12/12頁 |
| 文件大小： | 631K |
| 代理商： | 711-06E22-10S(416) |
9
Size #10 Data Bus Contact Assembly Instructions
Slide clamp nut, seal and ferrule over cable.
(Nut & seal only applicable on single way
connector).
Remove outer sheath of cable to 7.5mm comb out all
braids evenly and fold back. Remove cable fillers from
stripped length. Strip the centre contact conductor to
4.5mm. Note: It is recommended that both
intermediate and centre contact conductors are
scored at the correct stripping length. The
intermediate conductor insulation should not be
removed until the centre contact has been crimped.
Crimp centre contact (Pin or Socket) on to the
stripped wire using tool M22520/2-01 and crimp
positioner 294GB-5027-1 (setting No. 4 for 24AWG)
butting rear end of contact to wire insulation. The
conductor end should be visible in the inspection
hole. Note: A second hole is permissible in the
socket contact for manufacturing purposes. It is not
required to be on the same centre line as the
inspection hole.
Strip intermediate contact conductor to 4.5mm.
Insert centre contact into centre hole of intermediate
contact conductor into the outer hole of the
intermediate contact assembly. Push firmly home
until the centre contact is felt to snap into place and
ensure that the insulation of each conductor is fully
inserted into the intermediate contact insulator. The
intermediate conductor should be visible in the
inspection hole in the intermediate contact. There
should be no loose cable strands visible. Crimp the
intermediate contact assembly using the appropriate
cavity of crimp jaw 294GB-5026-1 fitted into
M22520/5-01 tool.
相關PDF資料 |
PDF描述 |
|---|---|
| 711-06E22-10SB(301) | 10 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
| 711-05E16-4S(416) | 4 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
| 711-05E16-4SB(301) | 4 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
| 711-05E16-4SB(416) | 4 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
| 711-05E16-4SC(301) | 4 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 71107 | 制造商:C&K Components 功能描述:STK YEL (T YE) 制造商:Grip Tools 功能描述:13 Piece Star Bit Socket Set- 1/4", 3/8", 1/2" 制造商:GRIP ON TOOLS 功能描述:13 PC STAR BIT SOCKETS 1/4-IN TO 1/2-IN |
| 711072 | 制造商:Phoenix Contact 功能描述:Cable Accessories Strain Relief |
| 71107202 | 制造商:DANAHER - TEKTRONIX 功能描述:MANUAL,TECH, USER,TRADITIONAL CHINESE,W/OVERLAYS, TDS1000 & TDS2000 SERIES, |
| 71107-50 | 制造商:Molex 功能描述: |
| 71107504 | 制造商:DANAHER - TEKTRONIX 功能描述:MANUAL,TECH, PROGRAMMER,ENGLISH ONLY, TDS200,TDS1000,TDS2000,TPS2000 SERIES, |
發布緊急采購，3分鐘左右您將得到回復。