
175
Catalog 1773096
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 2-10
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 52-55-1106-0803
UK: 44-(0)8002-67666
Card
Edge
Products
Power Connectors & Interconnection Systems
CROWN EDGE Card Edge-style High Current Connectors
Product Facts
■ Low cost power solution
■ Power, signal and mixed
modules
■ 35A per power contact
■ Mates with .062 (1.6 mm)
thick card edge or bus bar
tab
■ Press-fit or solder tail
terminations
■ True hot-plug power
modules
■ Meets regulatory safety
requirements
■ All CROWN EDGE products
in this section are RoHS
compliant.
Typical Applications
■ Board-to-board power
connections
■ DC-DC converters
■ Uninterruptible Power
Supply (UPS)
■ Power supplies
CROWN EDGE connectors
are a board-to-board power
interconnect solution that
uses ELCON high perform-
ance CROWN BAND
contact technology config-
ured to mate directly with
a printed circuit board edge
or — for higher currents —
with a solid bus bar. Power
and signal can be combined
and mounted end-to-end to
meet the requirements of
the applications.
Product Highlights
High-current Card Edge
Interface
CROWN EDGE connectors
use Tyco Electronics proven
ELCON CROWN BAND
contacts that provide
multiple points of contact
for high current, and low
voltage drop and minimal
heat generation. The
desired current rating
for most applications can
be achieved by bussing
multiple contacts or even
modules. For even higher
currents, CROWN EDGE
connectors can be
mounted onto a bus bar,
and mate directly with a
bus bar tab. Optimum inter-
face to the mounting PC
board is achieved through
five termination tails.
Flexible Modular Design
To make easy work of
power distribution design,
CROWN EDGE connectors
are available in modules of
2 and 3 contact segments
with power or signal con-
tacts or a combination of
both in a single module.
Modules can be placed
end-to-end for assemblies
up to 8" (203.20 mm) long.
Custom molded configura-
tions are possible on high-
volume projects. Consult
Tyco Electronics or your
local Tyco Electronics sales
representative for details.
Versatile Power Arrangements
Opposing contacts are
isolated, so power connec-
tions at different voltage
levels can be on one side
of the board, with ground or
power return on the other
side.
True Hot-Plug Support
CROWN EDGE power mod-
ules that support current
interruption under load as
defined by safety regulatory
agencies are also available
for mating to a metal blade
or bus bar tab. These true
hot-plug modules allow cur-
rent interruption under load
by incorporating a contact
design that restricts the
effects of arcing to areas
that do not compromise the
integrity of the connection.