![](http://datasheet.mmic.net.cn/170000/62175-402_datasheet_7975423/62175-402_1.png)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION
725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918
www.micropac.com
E-MAIL: OPTOSALES @ MICROPAC.COM
62175
HIGH BRIGHT LOW POWER
HERMETIC LED INDICATORS
OPTOELECTRONIC PRODUCTS
DIVISION
04/05/2010
Features:
Hermetically sealed
Choice of colors (Red, Yellow, Green, Blue)
180° Wide Viewing Angle
Designed for Hi-Reliability applications
Positive State Status in Sunlight
Applications:
P.C. Board Fault Indicator
Logic Status Indicator
Binary Data Display
Power supply on/off indicator
DESCRIPTION
The 62175 series indicators are hermetically sealed in TO-46 packages. A diffused dome lens provides good on/off contrast and
a wide viewing angle. The 62175-10X (Red) and 62175-20X (Yellow) indicators utilize a high efficiency AlGaInP on GaP LED,
while the 62175-30X (Green) and 62175-40X (Blue) indicators utilize a GaN on Sapphire LED. Each type uses a diffused plastic
lens over a glass window. All versions are available in standard, JAN, JANTX or JANTXV screened levels.
ABSOLUTE MAXIMUM RATINGS
Reverse Voltage ...................................................................................................................................................................... 5 Vdc
Power Dissipation (Note 1)................................................................................................................................................... 120 mW
Forward Current-Continuous (Note 2).................................................................................................................................... 20 mA
Operating Temperature .......................................................................................................................................... -55°C to +100°C
Storage Temperature.............................................................................................................................................. -65°C to +100°C
Lead Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................260°C
NOTES :
1.
Derate at the rate of 1.6 mW/°C above 25°C.
2.
Derate at the rate of 0.46 mW/°C above 25°C.
Dimensions
Schematic Diagram
0.190 [4.83]
0.176 [4.47]
0.220 [5.33]
0.180 [4.57]
0.024 [0.62]
0.016 [0.41]
1.030 [26.16]
0.970 [24.64]
GOLD PLATED
KOVAR
DIFFUSED
DOME
0.220 [5.59]
0.200 [5.08]
0.055 [1.39]
0.045 [1.14]
0.035 [0.89]
0.042 [1.07]
0.032 [0.81]
CATHODE
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
0.020 [0.51]
0.016 [0.41]
K
A