- 您現在的位置：買賣IC網 > PDF目錄222679 > 61-25UWC/S400-A6/TR8 (EVERLIGHT ELECTRONICS CO LTD) SINGLE COLOR LED, WHITE, 4 mm PDF資料下載
參數資料
| 型號： | 61-25UWC/S400-A6/TR8 |
| 廠商： | EVERLIGHT ELECTRONICS CO LTD |
| 元件分類： | LED |
| 英文描述： | SINGLE COLOR LED, WHITE, 4 mm |
| 封裝： | LEAD FREE, SMT, 6 PIN |
| 文件頁數： | 10/10頁 |
| 文件大?。?/td> | 163K |
| 代理商： | 61-25UWC/S400-A6/TR8 |
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.1
Page: 9 of 10
Device No.: DSE-615-002
Prepared date:08-04-2004
Prepared by: Bennett
61-25UWC/S400-A6/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and
do soldering of each terminal. Be careful because the damage of the product is often started at the
time of the hand solder.
相關PDF資料 |
PDF描述 |
|---|---|
| 610-998-21 | SINGLE COLOR LED, COOL WHITE, 5.1 mm |
| 61010-002L | PHOTO DARLINGTON DETECTOR |
| 612-934-23 | SINGLE COLOR LED, BLUE, 5.1 mm |
| 61393-502 | 16 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
| 61393-503N | 24 CONTACT(S), FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER, JACK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 6126 | 制造商:Osram Opto semiconductors 功能描述:Pack 制造商:Datak Corporation 功能描述:PUSH/PULL KNOB |
| 612-6 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC |
| 6126 BLACK | 功能描述:編碼器 ENCODER SHAFT RoHS:否 制造商:Avago Technologies 產品:Optical Encoders 類型:Absolute 每轉脈沖: 制動器數量: 通道數量:2 安裝風格:Through Hole 端接類型:Solder Pin 輸出: 軸類型: 帶開關: 電源電壓:5 V 工作溫度范圍:- 40 C to + 115 C |
| 6126 P8 1/2 | 制造商:Ohmite Mfg Co 功能描述:Thru-Bolts And Mounting Brackets |
| 612-60 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC |
發布緊急采購，3分鐘左右您將得到回復。