TB-2056 January 2009 Page 1 of 2
Ionizer Mounting Arm
Installation and Operation
Description
Figure 1. 60460 Ionizer Mounting Arm
The Desco 60460 Ionizer Mounting Arm is designed as
a mounting alternative for the 60500 Chargebuster Jr.
Ionizer. The 60460 allows a Jr. Ionizer to be mounted
off the bench top, saving valuable work bench space.
The articulated movement of the arm assembly allows
the user to focus the ionizer’s output directly onto the
desired areas, or across the entire work area.
The Ionizer Mounting Arm includes a C-clamp style
mounting system for ease of installation. The arm also
includes a three prong power cord with an IEC
termination.
Installation
Remove the mounting
arm from the carton and
inspect for damage.
Included with the unit
should be:
1 - C-clamp mounting
system
1 - Arm with IEC cord
installed.
Figure 2. Installing mounting
arm on workbench
Mount the arm in the
desired position using
the C-clamp mounting
system. Figure 2 shows
proper mounting of the
arm on a workbench.
The custom neck piece
on the arm allows for
easy mounting of a
standard Jr. Ionizer via
the stand assembly. The
ionizer should be
mounted to the arm by
tightening the bolt onto
the neck piece as
shown in Figure 3.
Specifications
Construction:
0.5" square, 20 gauge, cold rolled
steel
Size:
40" extended
Weight Capacity: 3.0 - 4.0 lbs.
Figure 3. Installing
Chargebuster Jr. to Ionizer
Mounting Arm
TECHNICAL BULLETIN TB-2056
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Fax (781) 575-0172 Web Site: http://www.desco.com
Limited Warranty
Desco expressly warrants that for a period of one (1) year from the
date of purchase, Desco Ionizer Mounting Arms will be free of
defects in material (parts) and workmanship (labor). Within the
warranty period, a unit will be tested, repaired or replaced at
Desco’s option, free of charge. Call Customer Service at 909-627-
8178 (Chino, CA) or (781) 821-8370 (Canton, MA) for Return
Material Authorization (RMA) and proper shipping instructions and
address. You should include a copy of your original packing slip,
invoice, or other proof of purchase date. Any unit under warranty
should be shipped prepaid to the Desco factory. Warranty repairs
will take approximately two weeks.
If your unit is out of warranty, Desco will quote repair charges
necessary to bring your unit to factory standards. Call Customer
Service at 909-627-8178 (Chino, CA) or (781) 821-8370 (Canton,
MA) for Return Material Authorization (RMA) and proper shipping
instructions and address.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF
ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
Electronic ionizers use high voltage corona discharge and should
not be used in or near flammable or explosive environments. In no
event will Desco or any seller be responsible or liable for any injury,
loss or damage, direct or consequential, arising out of the use of or
the inability to use the product. Before using, users shall determine
the suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection therewith.