- 您現在的位置：買賣IC網 > PDF目錄368875 > 24387 One Page AMD Athlon? and AMD Duron? Processor-Based System Build Checklist PDF資料下載
參數資料
| 型號： | 24387 |
| 英文描述： | One Page AMD Athlon? and AMD Duron? Processor-Based System Build Checklist |
| 中文描述： | 單頁的AMD Athlon？和AMD Duron？處理器為基礎的系統生成清單 |
| 文件頁數： | 1/1頁 |
| 文件大?。?/td> | 45K |
| 代理商： | 24387 |
AMD Athlon and AMD Duron Processor-Based System Build Checklist
2000 Advanced Micro Devices Inc.
Trademarks:
AMD, the AMD logo, AMD Athlon, AMD Duron, and combinations thereof are trademarks of Advanced Micro Devices, Inc
.
24387A October 2000
Make sure the custom system you are about to build has only components from
the
recommended
lists, and then follow this checklist to build your system
Always go to
http://www1.amd.com/athlon/config
or
http://www1.amd.com/duron/config
for config information
1.
Ensure the selected motherboard is appropriate for the processor model and frequency you are
planning to use. Check AMD Athlon or AMD Duron processor recommended motherboard list.
2.
Verify that your case follows the system case (chassis) airflow guidelines on the AMD website.
3.
Select your power supply from one on the AMD recommended power supply list.
(Or check that the one installed in your chassis is on the list.)
Note:
If necessary, install the recommended power supply before the installation of other components.
4.
Ensure that you are properly grounded at all times during the system construction to protect the
delicate electronic components from static electricity damage.
5.
Install the selected hard drives, floppy, DVD or CD-ROM player, and other devices into the chassis.
Note:
Check the hard drive model. If the hard drive supports UDMA-66 (also known as ATA-66) or supports
ATA-100, then you MUST also install the appropriate data cable.
6.
Remove the motherboard from its protective packaging and place it on a firm (but not hard) surface,
ideally a grounded anti-static pad.
7.
Remove the AMD Athlon or AMD Duron processor from its protective packaging (make sure you are
grounded), install the processor into the motherboard socket, then install an AMD recommeded
heatsink and fan assembly. Always follow the
Processor Installation Guide
that is on the AMD website.
8.
Install the assembled motherboard and processor with heatsink into the chassis. Always install any
standoffs needed to support the motherboard, especially in the areas where cards will be placed.
9.
Check the motherboard for any jumper settings. (Most of these motherboards do not require jumpers.)
10. Ensure selected memory (128 MBytes or more are recommended for best performance) is found on the
motherboard maker’s recommended memory list. If the motherboard manufacturer does not have a
verified/recommended memory listing, check with the memory supplier to verify that they have tested
your chosen motherboard to be compatible with the memory modules you plan to purchase.
11. Install the recommended memory into the motherboard. Be sure to install the RAM in the sequence
required for the motherboard. Verify each memory DIMM is inserted all the way and locked in place.
12. Install a high-performance AGP graphics card. Have the latest drivers available (see the website of the
card maker). You will need the drivers later.
13. Connect the power cables to the drives and motherboard.
14. Connect the hard drive, floppy, and DVD (CD-ROM) data cables in the normal manner. Verify that the
cables are installed securely and with the proper edge on Pin 1.
15. Connect the monitor data cable, keyboard cable, and mouse cable to the rear of the system.
16. Install the line power cord on the power supply.
17. Go to the websites of the motherboard vendor or the chipset maker for the latest drivers and utilities.
Check your motherboard vendor's web site for the latest version of the BIOS, AGP miniport driver and
bus mastering IDE driver. (AMD has drivers available for its chipsets. See the website listed above.)
18. Check the peripheral manufacturer's web site for the latest drivers for the sound card, network
interface card, etc. (and the graphics card if you have not done so already).
19. Power the system on and begin loading software and drivers, following the installation instructions.
20. Make sure the system starts and runs reliably with just the graphics card installed. Restart and run the
system multiple times. (Play one of the games included with the O/S to verify operation of the system.)
21. If other cards are to be installed, install them now—one at a time. Turn off the system and unplug it
before installing a card. Restart the system after each card installation.
Note:
If you have difficulties with the installation of any of the cards or drivers, read the document
entitled “Complex Configurations and IRQ Info” on the AMD website. See the website URLs listed above.
22. As you install each card, verify the card is properly installed (connector fully inserted into the slot,
front and back) and that the retention screws are in place.
23. Enjoy your new system.
相關PDF資料 |
PDF描述 |
|---|---|
| 243NQ100R | 100V 240A Schottky DISCR. (R) Diode in a D-67 HALF-Pak package |
| 243NQ | Audio Sample Rate Converter IC; IC Function:Audio Sample Rate Converter IC; Package/Case:20-QFN; Leaded Process Compatible:No; Operating Temp. Max:70 C; Operating Temp. Min:-10 C; Peak Reflow Compatible (260 C):No RoHS Compliant: Yes |
| 243NQ080 | Audio Sample Rate Converter IC; IC Function:Audio Sample Rate Converter IC; Package/Case:20-TSSOP; Leaded Process Compatible:Yes; Operating Temp. Max:85 C; Operating Temp. Min:-40 C; Supply Voltage:5.25V; Frequency:192GHz RoHS Compliant: Yes |
| 243NQ090 | Transceiver IC; Transceiver Type:Digital Audio; Supply Voltage:5V; Package/Case:28-SOIC; Frequency:96GHz; Interface Type:Serial; Leaded Process Compatible:No; No. of Drivers:1; No. of Receivers:1; Operating Temp. Max:70 C RoHS Compliant: No |
| 243NQ100 | SCHOTTKY RECTIFIER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 2438701 | 制造商:KROY INC 功能描述:K2000 INDUSTRIAL TAPE CARTRIDGE, .8"X40', BLACK IMAGE ON CLEAR |
| 2438716 | 制造商:KROY INC 功能描述:K2000 INDUSTRIAL TAPE CARTRIDGE, .8"X40', BLACK ON WHITE 制造商:Kroy 功能描述:Label Printer Tape 制造商:Kroy 功能描述:Label Printer Tape ;RoHS Compliant: NA |
| 243-872F | 制造商:LG Corporation 功能描述:LABELTCC-205 BJ5 JCP GIFT BO |
| 2438743 | 制造商:KROY INC 功能描述:.80 IN BLACK/YELLOW POLYESTER INDUSTRIAL LABEL CARTRIDGE SUPPLY 制造商:Kroy 功能描述:Label Printer Tape ;RoHS Compliant: NA |
| 24388 | 功能描述:安裝硬件 4.5 HEX 25.0mm BRS RoHS:否 制造商:Harwin 類型:SMT Cable Clip 材料:Phosphor Bronze 安裝孔大小: 長度:5 mm 外徑: 內徑: 厚度: 電鍍:Tin 螺紋大小: |
發布緊急采購，3分鐘左右您將得到回復。