![](http://datasheet.mmic.net.cn/170000/647692-1_datasheet_7994416/647692-1_22.png)
AMP Miniature Power Drawer (MPD) Connectors
The miniature power drawer
connector combines a high
density power interface in
a blind-mateable wire-to-
board connector. The MPD
contact interface has been
previously qualified to
requirements similar to
BellCore GR-1217 in board-
to-board applications. Now
available in a crimp-to-wire
version, the contacts are
rated for up to 15 Amps on
14 AWG wire. In addition,
the MPD contacts are
designed to meet UL 1977
hot-plug requirements for
up to 7.8 Amps at 48VDC.
The connection consists of
a vertical pcb mountable
receptacle and a panel-
mounted floating plug. The
vertical receptacle pcb tails
are designed for use in
either through hole solder
or press-fit applications.
The float-mount plug is eas-
ily installed from the inside
of the chassis without any
additional hardware, lending
itself to easy assembly of
pre-made cable assemblies.
Additionally, the staggered
wire exit pattern permits
the maximum number of
contact interfaces in the
least amount of connector
volume.
Product Facts
■ High mating cycle life
■ Low Mating and Un-mating
force (< 0.2lbs per contact)
■ Single-piece molded
housing
■ Molded-in guide pins
provide generous
blind-mateability
■ Sizes: 3 – 10 positions
■ Compact size is ideal for
distributed DC power
applications
■ Two Levels of contact
sequencing
■ One contact for either solder
or press-fit termination
■ Hardware — Less or
traditional shoulder bolt
mounting
■ Minimum of 3 mm contact
wipe on shortest power
contact
■ All MPD connectors in this
section are RoHS compliant
The compact design is
ideal for bringing power
to small rack-mounted
devices such as 1U
computer servers and
telecommunications
switches. The 3 mm center-
line satisfies UL 1977 safety
requirements for 48 VDC
distributed power applica-
tions. For higher voltage
applications such as AC
input, the contacts can be
selectively loaded to handle
up to 300 V AC or DC.
Specifications
Up to 16 Amps per contact
250 mating cycle durability
+/- 1.25 mm radial mis-alignment
capability. (Total float is 2.5 mm!)
1.6 mm sequencing distance — ideal
for modular sheet metal construction
applications
Minimum of 3 mm contact wipe on
shortest power contact
Maximum continuous operating
temperature — 105°C
UL 94 V-0 High-temperature thermo-
plastic housings
Technical Documents
Product Specification
108-1998
Application Specification
114-13067
Power Connectors & Interconnection Systems
Catalog 1773096
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 2-10
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 52-55-1106-0803
UK: 44-(0)8002-67666
83
Cable
Mounted
Products