- 您現在的位置：買賣IC網 > Datasheet目錄1 > 204-15/T2C3-4LQA (Everlight Electronics Co Ltd)LED 3MM INGAN WHITE WATER CLEAR Datasheet資料下載
參數資料
| 型號： | 204-15/T2C3-4LQA |
| 廠商： | Everlight Electronics Co Ltd |
| 文件頁數： | 8/11頁 |
| 文件大?。?/td> | 354K |
| 描述： | LED 3MM INGAN WHITE WATER CLEAR |
| 標準包裝： | 1,000 |
| 顏色： | 冷白色 |
| Millicandela 等級： | 2963mcd |
| 正向電壓： | 3.2V |
| 電流 - 測試： | 20mA |
| 視角： | 35° |
| 透鏡類型： | 透明 |
| 透鏡樣式/尺寸： | 圓形，帶圓頂，3mm，T-1 |
| 封裝/外殼： | 徑向 |
| 高度： | 5.20mm |
| 安裝類型： | 通孔 |
| 包裝： | 散裝 |
DATASHEET
LAMP
204-15/T2C3-4LQA
8
Copyright ?2010, Everlight All Rights Reserved. Release Date : May. 03, 2013. Issue No: DLE-0001234_Rev.4
www.everlight.com
204-15/T2C3-?/SPAN> ?/SPAN> ?/SPAN> ?/SPAN>
1. Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage the LEDs
characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of
the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED.
If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade
the LEDs.
2. Storage
The LEDs should be stored at 30?C or less and 70%RH or less after being shipped from Everlight and the
storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a
sealed container with a nitrogen atmosphere and moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where
condensation can occur.
3. Soldering
Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to
epoxy bulb, and soldering beyond the base of the tie bar is recommended.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
300 Max. (30W
Max.)
Preheat temp.
100 Max. (60 sec
Max.)
Soldering time
3 sec Max.
Bath temp. & time
260 Max., 5 sec Max
Distance
3mm Min.(From
solder joint to epoxy
bulb)
Distance
3mm Min. (From solder
joint to epoxy bulb)
Color Group
Luminous Intensity Bins
Voltage Group
相關PDF資料 |
PDF描述 |
|---|---|
| 264-10UYD/S530-A3 | LED 3MM ARRAY SUPER YLW YLW DIFF |
| 264-7SDRD/S530-A3 | LED 3MM SUPER DEEP RED RED DIFF |
| 264-7SURC/S400-A8 | LED 3MM ALGAINP HYPER RED CLR |
| 264-7SURT/S530-A3 | LED 3MM ALGAINP HYPER RED TRANSF |
| 264-7UYC/S400-A9 | LED 3MM SUPER YELLOW WATER CLR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 204-15-T2C3-4LQA_09 | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:Popular T-1 round package |
| 204-15-T2C3-4NQA | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:Popular T-1 round package |
| 204-15UTC/S400-A6 | 制造商:Everlight Electronics Co 功能描述:204-15UTC/S400-A6 - Bulk |
| 204-15UTC/S400-X9 | 功能描述:標準LED-通孔 WHITE WATER CLEAR 7150 MCD MAX RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| 204-15UTC/S400-X9/TR1(R) | 制造商:Everlight Electronics Co 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。