參數資料
型號： 20-101-1132
廠商： Rabbit Semiconductor
文件頁數： 125/134頁
文件大?。?/td> 0K
描述： MODULE RCM4210 RABBITCORE
產品培訓模塊： WiFi Authentication
標準包裝： 1
系列： RabbitCore®
模塊/板類型： MPU 核心模塊
適用于相關產品： RCM4210
其它名稱： 316-1125
84
RabbitCore RCM4200
6.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the RCM4200 mod-
ule’s RJ-45 Ethernet connector. Open this sample program from the SAMPLES\TCPIP\
ICMP
folder, compile the program, and start it running under Dynamic C. The crossover
cable is connected from your computer’s Ethernet adapter to the RCM4200 module’s RJ-45
Ethernet connector. When the program starts running, the green LINK light on the RCM4200
module should be on to indicate an Ethernet connection is made. (Note: If the LINK light
does not light, you may not be using a crossover cable, or if you are using a hub with
straight-through cables perhaps the power is off on the hub.)
The next step is to ping the module from your PC. This can be done by bringing up the
MS-DOS window and running the pingme program:
ping 10.10.6.101
or by Start > Run
and typing the entry
ping 10.10.6.101
The ping routine will ping the module four times and write a summary message on the
screen describing the operation.
6.6 Running Additional Sample Programs With Direct Connect
The following sample programs are in the Dynamic C SAMPLES\RCM4200\TCPIP\
folder.
BROWSELED.C
—This program demonstrates a basic controller running a Web page.
Two “device LEDs” are created along with two buttons to toggle them. Users can use
their Web browser to change the status of the lights. The DS2 and DS3 LEDs on the
Prototyping Board will match those on the Web page. As long as you have not modified
the TCPCONFIG 1 macro in the sample program, enter the following server address in
your Web browser to bring up the Web page served by the sample program.
http://10.10.6.100.
Otherwise use the TCP/IP settings you entered in the TCP_CONFIG.LIB library.
PINGLED.C
—This program demonstrates ICMP by pinging a remote host. It will flash
LEDs DS2 and DS3 on the Prototyping Board when a ping is sent and received.
SMTP.C
—This program demonstrates using the SMTP library to send an e-mail when
the S2 and S3 switches on the Prototyping Board are pressed. LEDs DS2 and DS3 on
the Prototyping Board will light up when e-mail is being sent.
相關PDF資料
PDF描述
20-101-1094 MCU RCM4000 RABBITCORE
345-030-540-802 CONN CARDEDGE 30POS .100 X .200
305-030-500-202 CONN CARDEDGE 30POS .156 X .140
243-002-542-101 MINI CARD EDGE 0.2" - 2PIN 1ROW
20-101-1217 MODULE RABBITCORE RCM3229
相關代理商/技術參數
參數描述
20-101-1136 功能描述:射頻模塊 RF Module Interface RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
20-101-1138 功能描述:模塊化系統 - SOM RCM4300 RABBITCORE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1139 功能描述:模塊化系統 - SOM RCM4310 RABBITCORE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1140 功能描述:WiFi/802.11模塊 RCM4400W CORE MODULE Wi-Fi/802.11 RoHS:否 制造商:Taiyo Yuden 支持協議:802.11 b/g/n 頻帶: 數據速率:150 Mbps 接口類型:SDIO 傳輸功率（最大）: 天線連接器類型: 工作電源電壓:3.4 V to 5.5 V 傳輸供電電流: 接收供電電流: 最大工作溫度:+ 80 C 尺寸:35 mm x 15 mm x 2.9 mm
20-101-1153 功能描述:子卡和OEM板 RCM4300 Proto board RoHS:否 制造商:BeagleBoard by CircuitCo 產品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*