41
Dimensions are in inches and
Dimensions are shown for
Technical Support
www.tycoelectronics.com
millimeters unless otherwise
reference purposes only.
USA: 1-800-522-6752
specified. Values in brackets
Specifications subject to change.
Canada: 1-905-475-6222
are metric equivalents.
Mexico: 01-800-733-8926
MAG-MATE and SIAMEZE Application Tooling (Continued)
Magnet Wire Terminals and Termination Systems
Catalog 82221
Revised 10-02
MPT-5S/L Machine for Mag
Wire Coil Termination
utilizing SIAMEZE and
Lead Lok terminals
Product Facts
s
Single, dual and triple
insertion
s
Two-reel, two-product
capability, with alternating
feed capability
s
Available as horizontal
bench, vertical bench or
independent module
s
Module easily integrates
into production lines using
simple handshake signals
s
Fine adjustment mechanism
for insertion depth
(.001 increments)
s
Tube-type insertion tooling
for standard SIAMEZE &
Lead Lok terminals
s
Microprocessor controlled
operation
s
Holding fixture for bobbin
can be designed and built
by Tyco Electronics or the
customer
For quick, easy and reliable
termination of magnet wire
without pre-stripping the
insulation or soldering,
Tyco Electronics offers the
SIAMEZE terminals and
Lead Lok product family
and the MPT-5S/L
(MAG-MATE Product
Terminator) air-operated
insertion machine with
micro-processor control.
The MPT-5S/L machine
inserts a SIAMEZE terminal
into a customer-designed
cavity in the coil bobbin or
similar magnet-wire
housing, terminating the
wire and providing an I/O
terminal or other connection.
The MPT-5S/L can insert
both the SIAMEZE terminal
for magnet wire termination
and the Lead Lok terminal
to assure your lead wire
connection.
Dual reel capability of the
MPT-5S/L allows insertion
of two different SIAMEZE
terminals, with the capability
to alternate between
inserting one and two
terminals at a time. Two
terminations per second are
possible with dual insertion.
A fifth generation machine,
the MPT-5s/L is lighter and
quieter than previous
versions. The MPT-5S/L is
available as a horizontal or
vertical bench machine or
as a discrete module for
integration into automated
lines. The discrete module
also can be used to make
a custom horizontal or
vertical bench machine.
A fixture to hold the coil
assembly, which is required
for bench operation, can
be designed and built by
Tyco Electronics or the
customer.
The MPT-5S/L uses three
or four air cylinders to feed
terminals from one or both
reels, cut terminals from the
carrier strip, and insert
terminals into the cavities.
The display shows the
operating conditions of the
machine such as the batch
count, total count, error
messages, and ready state.
The display also lets the
operator step through the
machine sequence or
manually cycles the
machine for set up or easy
diagnosis of problems.
Solderless SIAMEZE
terminations:
s
No need to pre-strip the
magnet wire
s
No wire embrittlements
due to solder
s
No soldering fumes
s
Compact, clean
termination
s
Ideal for automation
s
Fast magnet and lead
wire connections: Up to
two per second with dual
insertion
MAG-MATE
and
SIAMEZE
Application
Tooling