Bristol, PA 19007-6810 USA
TEL (215) 781-9956 FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
FEATURES
Aries DIP programmable headers offer unusual versatility for programming within
the header itself
They can be individually programmed using cutters or Aries programming tool, P/N
T-675, available separately, to remove the interconnecting sections. Consult
Adjacent and/or opposing pins are interconnected until the pre-slotted section is
programmed out. An almost infinite number of programs can be attained by merely
leaving or removing interconnecting sections
A low profile, snap-on cover protects header from dirt or accidental damage, and
can be marked to identify the program within the header
GENERAL SPECIFICATIONS
STANDARD HEADER BODY AND COVER: black UL 94V-0 4/6 Nylon
PINS: Brass 3/4-hard
PIN PLATING: “-T” 200 [5.08] min. matte Sn per ASTM B545-97 2004e1
over 50 [1.27] min. Ni per QQ-N-290; “-G” 10 [0.25] Au per MIL-
G-45204 over 50 [1.27] min. Ni per QQ-N-290; “-TL” 200 [5.08]
90/10 Sn/Pb per MIL-T-10727 Type I over 50 [1.27] min. Ni per QQ-N-
290
CURRENT RATING: 2 amps
OPERATING TEMPERATURE: 221°F [105°C] Sn or Sn/Pb plating; 257°F
[125°C] Au plating
MOUNTING CONSIDERATIONS
SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia.
16004
Rev. AA
Series 675
DIP Program Headers
Pins
8, 14 & 16 only*
Series
Style
190 or 191 (see dwg)
* Consult factory for other sizes
ORDERING INFORMATION
XX-675-19X X
Plating
None = Au
T = Sn
TL = Sn/Pb
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity.
NOTE: Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
“A” = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.050 [1.27]
“B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54]
COVERS AVAILABLE FOR 8-, 14- AND 16-PIN HEADERS. TO ORDER,
SPECIFY P/N XX-650-10, WHERE “XX” DENOTES THE NUMBER OF
PINS. CONSULT DATA SHEET 12033 FOR ADDITIONAL INFORMA-
TION.
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS