![](http://datasheet.mmic.net.cn/170000/647692-1_datasheet_7994416/647692-1_24.png)
Hybrid Blind-Mate Drawer Connectors
Product Facts
■ High current circuits and
signal circuits can be mixed
in the same connector
■ High current circuits use
MIC connector contacts
located at four corners of
the housing
■ Signal circuits use Standard
Drawer Connector contacts
■ 24 positions
■ Hermaphroditic housing
can be mated with top and
bottom turned while
maintaining polarity
Hybrid Drawer Connectors
offer high current and
signal circuits mixed in the
same connector system.
High current circuits use
MIC connector contacts
which are located at the
four corners of the housing.
Signal circuits use the same
Performance Specifications
Voltage Rating — 250 VAC
Current Rating (Max.) —
Signal Circuit (Drawer);
4 Amps — 24 AWG [0.2 mm2] Wire
5 Amps — 22 AWG [0.3-0.4 mm2] Wire
7 Amps — 20 AWG [0.5-0.6 mm2] Wire
Power Circuit (MIC);
10 Amps
Low Level Resistance —
Signal Circuit (Drawer);
10 milliohms max. (Initial)
20 milliohms max. (Final)
Power Circuit (MIC);
3 milliohms (Initial)
6 milliohms (Final)
Dielectric Withstanding Voltage —
5000 milliohms (Initial)
2000 milliohms (Final)
Operating Temperature —
–20°C to +120°C
hermaphroditic crimp snap-
in contacts that are used
in the Standard Drawer
Connector.
The hermaphroditic hous-
ings are available in a pop-
ular 24-position size. These
housings can be mated
with top and bottom turned
while maintaining polarity.
Power Connectors & Interconnection Systems
Catalog 1773096
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 2-10
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 52-55-1106-0803
UK: 44-(0)8002-67666
85
Cable
Mounted
Products