- 您現在的位置：買賣IC網 > PDF目錄7250 > 10408 (Desco)PAINT COND LATEX GREY 1GAL PDF資料下載
參數資料
| 型號： | 10408 |
| 廠商： | Desco |
| 文件頁數： | 3/7頁 |
| 文件大?。?/td> | 0K |
| 描述： | PAINT COND LATEX GREY 1GAL |
| 標準包裝： | 1 |
| 系列： | Statguard® |
| 處理劑/清潔劑類型： | 涂料，導電 |
| 使用： | 地板 |
| 技術規格： | 灰 |
| 數量： | 1 加侖 |
| 包裝： | 桶 |
| 其它名稱： | 82001 |
maintenance. Apply Statguard Floor Finish
after 48-72 hours after last coat of paint. Paint
becomes dry to the touch, but is not fully cured
to accept a finish coat until this time. If you
notice the paint color coming off when finishing,
it is too soon to apply. Please wait for the
paint to cure fully. Ask for Technical Bulletin
TB-2088 for more information on Statguard
Floor Finish.
Physical Properties
Type:
Water base acrylic coating
Color:
Grey, Light Grey
Vehicle Type:
Pure acrylic resin waterborne
Pigment Type:
Lead free, iron oxide, titanium dioxide and extenders
Viscosity:
Light Grey
26” #3 Zahn cup
Grey
23” #3 Zahn cup
Solids:
Light Grey
24% by volume
Grey
20% by volume
Coating Density:
Light Grey
9.54 lbs per gallon
Grey
10.27 lbs per gallon (1.0 kilograms per
litre)
Gloss:
Light Grey
2 @ 60°F
Grey
22 @ 60°F (30 @ 60°C)
Temperature Range:
Wet: 33°F - 110°F (1°C - 43°C)
Dry: 33°F - 300°F (1°C - 149°C)
(300°F [149°C] not continuous)
Electrical Properties
Surface Resistivity:
TB-7001 Page 3 of 7
Figure 4. Electrical testing on
the painted floor using a Surface
Resistance Test Kit.
1.
Use a razor to cut into a painted, dried
floor.
3.
Pull the tape off.
2.
Apply tape on the precut area.
4.
Examine the degree of paint separation
from the concrete.
Figure 5. Adhesion test on the painted floor.
10E5 ohms/sq. per ASTM D257
Static Charge Decay:
<0.01 sec. per FTMS 101B, Method 4046
Charge Generation:
Zero per AATCC Step Test, Method 134-1979
RTT:
10E5 ohms per ANSI ESD-S7.1
RTG:
10E5 ohms per ANSI ESD-S7.1
Testing
Test patch areas should be tested for adhesion and electrical
performance of the paint before applying paint to the entire floor. To
best ensure consistent results, the test should be done at various
locations.
ELECTRICAL PROPERTIES:
Test the surface resistivity, point-to-point resistance, and resistance-
to-ground properties of coated area per ANSI ESD-S7.1 test method.
For quick and easy verification of the paint’s electrical properties,
we recommend the use of our a Surface Resistance Test Kit (Figure
4). For more information contact any of the Desco Industries Inc.
companies.
ADHESION:
Allow newly applied paint to dry a minimum of 48 hours before
proceeding with the test. At humidity levels over 55% RH, allow 72
hours of drying time before testing. Use a razor to cut a cross or a few
perpendicular lines over a 3” by 3” (75 mm by 75 mm) area on several
spots of the thoroughly dried area. Use a piece of masking tape to
cover the marked area. Make sure the tape is thoroughly adhered to
the test area. Pull the tape off the surface and examine the amount
of paint which has peeled off during the test. If any significant portion
is transferred to the tape, better surface preparation (acid etching,
cleaning or sanding) should be done on the substrate to enhance the
adhesion.
2011 DESCO INDUSTRIES INC.
Employee Owned
DESCO INDUSTRIES INC. 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449 Web Site: DescoIndustries.com
相關PDF資料 |
PDF描述 |
|---|---|
| 432315-09-0 | TERM BARRIER 9CIRC SGL ROW .4375 |
| 432310-09-0 | TERM BARRIER 9CIRC SGL ROW .4375 |
| 432303-09-0 | TERM BARRIER 9CIRC SGL ROW .4375 |
| 432302-09-0 | TERM BARRIER 9CIRC SGL ROW .4375 |
| 432215-09-0 | TERM BARRIER 9CIRC SGL ROW .4375 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 10-408 | 功能描述:SKT 1/4DR 4PT 1/4 制造商:apex tool group 系列:* 零件狀態:在售 標準包裝:1 |
| 1040800000 | 功能描述:CONN TERM BLOCK FEED THRU 5MM RoHS:是 類別:連接器，互連式 >> 接線座 - Din 軌道，通道 系列:W 標準包裝:50 系列:CLIPLINE UKK 類型:饋通式 斷開類型:- 位置數:4 級別數目:2 端子 - 寬度:6.2mm 端接類型:螺釘 電流 - IEC:32A 電壓 - IEC:500V 電流 - UL:30A 電壓 - UL:600V 線規或范圍 - AWG:10-26 AWG 線規或范圍 - mm²:0.2-4mm² 特點:- 顏色:藍 保險絲類型:- 材料 - 絕緣體:聚酰胺（PA），尼龍 材料可燃性額定值:UL94 V-0 剝線長度:8mm 其它名稱:277-35202774091-NDUKK5BU |
| 10-40808-XX | 制造商:AMPHENOL 制造商全稱:AMPHENOL 功能描述:MIL-DTL-5015 and Mil-5015 Type Standard Cylindrical Connectors |
| 1040810000 | 制造商:Weidmuller 功能描述:CONN HEADER 6POS 3.81MM BLK R/A 制造商:Weidmuller 功能描述:HEADER 3.81MM R/A 6WAY 制造商:Weidmuller 功能描述:HEADER, 3.81MM, R/A, 6WAY |
| 10-40810-XX | 制造商:AMPHENOL 制造商全稱:AMPHENOL 功能描述:MIL-DTL-5015 and Mil-5015 Type Standard Cylindrical Connectors |
發布緊急采購，3分鐘左右您將得到回復。