參數資料
型號: 101-1070
廠商: Rabbit Semiconductor
文件頁數: 124/160頁
文件大?。?/td> 0K
描述: KIT DEV RABBIT RCM3305 INTL
標準包裝: 1
系列: RabbitCore 3000
類型: MPU 模塊
適用于相關產品: RCM3305
所含物品: RabbitCore 模塊,開發板,纜線和 Dynamic C? CD-Rom
60
RabbitCore RCM3305/RCM3315
6.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the RCM3305/
RCM3315 board’s RJ-45 Ethernet connector. Open this sample program from the SAM-
PLES\TCPIP\ICMP
folder, compile the program, and start it running under Dynamic C.
The crossover cable is connected from your computer’s Ethernet adapter to the RCM3305/
RCM3315 board’s RJ-45 Ethernet connector. When the program starts running, the green
LINK
light on the RCM3305/RCM3315 module should be on to indicate an Ethernet con-
nection is made. (Note: If the LNK light does not light, you may not be using a crossover
cable, or if you are using a hub perhaps the power is off on the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-
DOS window and running the pingme program:
ping 10.10.6.101
or by Start > Run
and typing the entry
ping 10.10.6.101
Notice that the yellow ACT light flashes on the RCM3305/RCM3315 module while the
ping is taking place, and indicates the transfer of data. The ping routine will ping the board
four times and write a summary message on the screen describing the operation.
6.6 Running Additional Sample Programs With Direct Connect
The following sample programs are in the Dynamic C SAMPLES\RCM3300\TCPIP\
folder.
BROWSELED.C
—This program demonstrates a basic controller running a Web page.
Two “device LEDs” are created along with two buttons to toggle them. Users can use
their Web browser to change the status of the lights. The DS3 and DS4 LEDs on the
Prototyping Board will match those on the Web page. As long as you have not modified
the TCPCONFIG 1 macro in the sample program, enter the following server address in
your Web browser to bring up the Web page served by the sample program.
http://10.10.6.100
Otherwise use the TCP/IP settings you entered in the TCP_CONFIG.LIB library.
MBOXDEMO.C
—The optional LCD/keypad module (see Appendix C) must be plugged
in to the Prototyping Board when using this sample program. This program demon-
strates sending e-mail messages that are then shown on the LCD/keypad module dis-
play. The keypad is used to scroll through a menu to view the messages, flip to other
messages, mark messages as read, and delete messages. When a new e-mail arrives, an
LED on the LCD/keypad module turns on, and then turns off once the message has
been marked as read. A log of all e-mail actions is kept, and can be displayed in the
Web browser. All current e-mails can also be read with the Web browser.
PINGLED.C
—This program demonstrates ICMP by pinging a remote host. It will flash
LEDs DS3 and DS4 on the Prototyping Board when a ping is sent and received.
相關PDF資料
PDF描述
SC43B-4R7 INDUCTOR SMD 4.7UH 1.22A 7.96MHZ
EEM28DTKT CONN EDGECARD 56POS DIP .156 SLD
0210390966 CABLE JUMPER 1MM .051M 27POS
101-0679 KIT DEV RABBIT RCM3600 INTL
101-0577 KIT DEV FOR BL2500 COYOTE
相關代理商/技術參數
參數描述
1011072129 制造商:OMRON AUTOMATION AND SAFETY 功能描述:MICRON ADAPTOR PLATE
10-110-721-29 制造商:OMRON AUTOMATION AND SAFETY 功能描述:MICRON ADAPTOR PLATE 制造商:Omron Electronic Components LLC 功能描述:Micron Adaptor Plate 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:MICRON ADAPTOR PLATE
101-107-283 制造商:NSW 功能描述:
101-107-316 制造商: 功能描述: 制造商:undefined 功能描述:
1011-075 制造商:ROEBUCK 功能描述:ROEBUCK TOOLMAKERS CLAMP 3"