
6
Catalog E 074484
04/04
Edition 6
www.erni.com
Integrated Accessories
Riveted nut (see fig. 1)
On the version with riveted nut there is a nut riveted into the
mounting flanges of the connector so that it cannot twist. The
thread is available as a M3 and 4/40" version. This facilitates
fitting into housings or front panels.
Threaded bolt (see fig. 2)
To ensure secure connector locking, a screw locking device is
frequently used with threaded bolts. TMC connectors from
ERNI are available with riveted threaded bolts. These hexagon
bolts are available with internal threads of M3 and 4/40". For
the user it means there is no need for loose accessories.
Spacer bolt (see fig. 3)
Due to the design of the TMC connectors a spacer is required
for vertical assembly on pc boards. These parts are supplied
by ERNI as individual accessories.
Ground pin (see fig. 4)
The additional ground pin is designed for connecting up to the
pc board chassis contact for example.
Spacer bolt with mounting clip (on request)
(see fig. 5)
These spacer bolts can be snapped into the mounting holes
on the pc board. If the holes are plated-through there will also
be a solder joint.
Ground clip (see fig. 6)
For screening contact there are angled ERNI TMC connector
ground clips available. These clips are soldered into the
mounting holes on the pc board, thus creating a firm chassis
connection.
Ground bar (see fig. 7)
Ground bars on angled connectors are attached to the guide
frame on the pc board. This makes it possible to make
connection with chassis conductors on the pc board.
Ground eyelet (on request) (see fig. 8)
With the ground lug the chassis contact can be soldered on.