422
APPENDIX B DEVELOPMENT TOOLS
B.3.1 Hardware (2/2)
(2) When using the in-circuit emulator IE-78001-R-A
IE-78001-R-A
Note
In-circuit Emulator
IE-70000-98-IF-B or
IE-7000-98-IF-C
Note
Interface Adapter
IE-70000-PC-IF-B or
IE-7000-PC-IF-C
Note
Interface Adapter
IE-78000-R-SV3
Interface Adapter
IE-780034-NS-EM1
Note
Emulation Board
IE-78K0-R-EX1
Note
Emulation Probe
Conversion Board
EP-78240CW-R
Emulation Probe
EP-78240GC-R
Emulation Probe
EV-9200GC-64
Conversion Socket
(Refer to
Figures
B-2 and B-3
)
EP-78012GK-R
Emulation Probe
TGK-064SBW
Conversion Adapter
(Refer to
Figure
B-4
)
Note
Under development
Remarks 1.
TGK-064SBW is a product of TOKYO ELETECH CORPORATION.
Phone: (03) 3820-7112 Tokyo Electronic Component Division
(06) 244-6672
Osaka Electronic Component Division
2.
EV-9200GC-64 is sold in five units.
3.
TGK-064SBW is sold in one units.
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to integrated
debugger (ID78K0). This emulator should be used in combination with emulation
probe and interface adapter, which is required to connect this emulator to the host
machine.
This adapter is required when using the PC-9800 series computer (except notebook
type) as the IE-78001-R-A host machine.
This adapter is required when using the IBM PC/AT and its compatible computers
as the IE-78001-R-A host machine.
This is adapter and cable required when using an EWS computer as the IE-78001-
R-A host machine, and is used connected to the board in the IE-78000-R-A.
This board emulates the operations of the peripheral hardware peculiar to a device.
It should be used in combination with an in-circuit emulator and emulation conver-
sion board.
This board is required when using the IE-780034-NS-EM1 on the IE-78001-R-A.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic shrink DIP (CW type).
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic QFP (GC-AB8 type).
This conversion socket connects the EP-78240GC-R to the target system board
designed to mount a 64-pin plastic QFP (GC-AB8 type).
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic LQFP (GK-8A8 type).
This conversion socket connects the EP-78012GK-R to the target system board
designed to mount a 64-pin plastic LQFP (GK-8A8 type).