參數資料
型號： W83697UF
英文描述： W83697F plus 2 Extra UART (total 4 UART)
中文描述： W83697F加2額外的UART（共4 UART）的
文件頁數： 25/78頁
文件大小： 475K
代理商： W83697UF
W83697UF
Publication Release Date: Dec.2002
- 21 - Revision 1.0
The configuration registers can be reset to their default or hardware settings only by a cold reset (pin
MR = 1). A warm reset will not affect the configuration registers.
2.2.2 Extended Functions Enable Registers (EFERs)
After a power-on reset, the W83697UF enters the default operating mode. Before the W83697UF
enters the extended function mode, a specific value must be programmed into the Extended Function
Enable Register (EFER) so that the extended function register can be accessed. The Extended
Function Enable Registers are write-only registers. On a PC/AT system, their port addresses are 2Eh
or 4Eh (as described in previous section).
2.2.3 Extended Function Index Registers (EFIRs), Extended Function Data Registers(EFDRs)
After the extended function mode is entered, the Extended Function Index Register (EFIR) must be
loaded with an index value (02h, 07h-FEh) to access Configuration Register 0 (CR0), Configuration
Register 7 (CR07) to Configuration Register FE (CRFE), and so forth through the Extended Function
Data Register (EFDR). The EFIRs are write-only registers with port address 2Eh or 4Eh on PC/AT
systems; the EFDRs are read/write registers with port address 2Fh or 4Fh on PC/AT systems.
2.3 Configuration Sequence
To program W83697UF configuration registers, the following configuration sequence must be
followed:
(1). Enter the extended function mode
(2). Configure the configuration registers
(3). Exit the extended function mode
2.3.1 Enter the extended function mode
To place the chip into the extended function mode, two successive wrtites of 0x87 must be applied to
Extended Function Enable Registers(EFERs, i.e. 2Eh or 4Eh).
2.3.2 Configurate the configuration registers
The chip selects the logical device and activates the desired logical devices through Extended
Function Index Register(EFIR) and Extended Function Data Register(EFDR). EFIR is located at the
same address as EFER, and EFDR is located at address (EFIR+1).
First, write the Logical Device Number (i.e.,0x07) to the EFIR and then write the number of the desired
logical device to the EFDR. If accessing the Chip(Global) Control Registers, this step is not required.
Secondly, write the address of the desired configuration register within the logical device to the EFIR
and then write (or read) the desired configuration register through EFDR.
2.3.3 Exit the extended function mode
To exit the extended function mode, one write of 0xAA to EFER is required. Once the chip exits the
extended function mode, it is in the normal running mode and is ready to enter the configuration
mode.
相關PDF資料
PDF描述
W83777F Peripheral IC
W83877AD Peripheral (Multifunction) Controller
W83877AF Peripheral (Multifunction) Controller
W83910F IPMI BMC plus H/W Monitor. UART. 5-sets Master/Slave SMBus. for Server PC Application
W83977CTF-AW PERIPHERAL (MULTIFUNCTION) CONTROLLER
相關代理商/技術參數
參數描述
W83697UG 功能描述:IC LPC SUPER I/O 128-PQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA，便攜式音頻/視頻，智能電話 接口:I²C，2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
W83757 制造商:WINBOND 制造商全稱:Winbond 功能描述:SUPER I/O CHIP
W83759 制造商:WINBOND 制造商全稱:Winbond 功能描述:ADVANCED VL-IDE DISK CONTROLLER
W83759A 制造商:WINBOND 制造商全稱:Winbond 功能描述:ADVANCED VL-IDE DISK CONTROLLER
W83768 制造商:WINBOND 制造商全稱:Winbond 功能描述:I/O COUPLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*