參數資料
型號： ULTRA160
英文描述： 8-bit MCU with single voltage Flash memory, ADC, 16-bit timers, SPI, SCI interfaces
中文描述： Ultra160的SCSI到PCI主機適配器用戶指南1.1版10/01
文件頁數： 25/54頁
文件大?。?/td> 504K
代理商： ULTRA160
Terminating the SCSI Bus
2-9
The Ultra160 SCSI host adapters automatically control SCSI bus
termination for various bus configurations.
In one case, you may disable termination by using BIOS software control
to change the BIOS termination from Automatic to Off.
In another case where jumpers are provided on the board, you would
locate the shunts on the board for autotermination override. Termination
can be disabled by placing a manual shunt over the post. When the
shunt is off, the terminator is active. When the shunt is on the post, the
terminator is disabled.
Figure 2.7
illustrates how the shunt controls
autotermination.
Figure 2.7
Autotermination Shunt
2.3.1
Internal and External SCSI Terminations
If you are making internal SCSI device connections to your host adapter,
you must terminate the last internal device on the SCSI bus. If you are
making external SCSI device connections to your host adapter, you must
terminate the last external device on the SCSI bus. You must disable the
termination on all other devices. Termination on your host adapter is
automatically enabled in this case.
2.3.2
Setting SCSI IDs
You must set each SCSI device and the host adapter to a separate SCSI
ID. The IDs are 0 through 7 for an 8-bit bus and 0 through 15 for a 16-bit
bus. SCSI ID 7 is the preset host adapter setting, giving it the highest
priority on the SCSI bus.
If you plan to boot your computer from a hard disk drive on the SCSI
bus, that drive should have SCSI ID 0, or the lowest SCSI ID on the bus.
Normally, you do not change the host adapter SCSI ID setting. If you
wish to do so, refer to the
PCI Storage Device Management System
SDMS 4.0 User’s Guide,
which explains how to set your host adapter ID
using the SCSI BIOS Configuration Utility.
Autotermination enabled (no jumper installed)
Termination disabled (jumper installed)
相關PDF資料
PDF描述
ULTRA320 8-bit MCU with single voltage Flash memory, ADC, 16-bit timers, SPI, SCI interfaces
ULTRABEAMSYSTEM 8-bit MCU with single voltage Flash memory, ADC, 16-bit timers, SPI, SCI interfaces
ULTRABEAMTRANSMITTER 8-bit MCU with single voltage Flash memory, ADC, 16-bit timers, SPI, SCI interfaces
ULTRATHIN-5PIN Package Dimensions
ULV60 ULV/ULH TYPE
相關代理商/技術參數
參數描述
ULTRA320 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Ultra320 SCSI to PCI-X host adapters user＇s guide v2.0 5/02
ULTRA37000 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:5V, 3.3V, ISRa?￠ High-Performance CPLDs
ULTRA37000_04 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:5V, 3.3V, ISR High-Performance CPLDs
ULTRABEAM SYSTEM 制造商:FSL 功能描述:IR REMOTE CONTROL
ULTRABEAM TRANSMITTER 制造商:FSL 功能描述:TRANSMITTER ULTRABEAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*