- 您現在的位置：買賣IC網 > PDF目錄98203 > TDA8777HL/24 (NXP SEMICONDUCTORS) PARALLEL, WORD INPUT LOADING, 10-BIT DAC, PQFP48 PDF資料下載
參數資料
| 型號： | TDA8777HL/24 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | DAC |
| 英文描述： | PARALLEL, WORD INPUT LOADING, 10-BIT DAC, PQFP48 |
| 封裝： | 7 X 7 MM, 1.40 MM PITCH, MS-026, PLASTIC, LQFP-48 |
| 文件頁數： | 4/14頁 |
| 文件大?。?/td> | 87K |
| 代理商： | TDA8777HL/24 |
2004 May 17
12
Philips Semiconductors
Objective specication
Triple 10-bit video DAC
up to 330 Msps
TDA8777
Suitability of surface mount IC packages for wave and reow soldering methods
Notes
1. For more detailed information on the BGA packages refer to the
“(LF)BGA Application Note” (AN01026); order a copy
from your Philips Semiconductors sales office.
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the
“Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.
3. These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217
°C ± 10 °C measured in the atmosphere of the reflow oven. The package body peak temperature
must be kept as low as possible.
4. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
5. If wave soldering is considered, then the package must be placed at a 45
° angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
6. Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
7. Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
8. Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered pre-mounted
on flex foil. However, the image sensor package can be mounted by the client on a flex foil by using a hot bar
soldering process. The appropriate soldering profile can be provided on request.
9. Hot bar or manual soldering is suitable for PMFP packages.
PACKAGE(1)
SOLDERING METHOD
WAVE
REFLOW(2)
USON, VFBGA
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP, HSQFP, HSSON,
HTQFP, HTSSOP, HVQFN, HVSON, SMS
not suitable(4)
suitable
PLCC(5), SO, SOJ
suitable
LQFP, QFP, TQFP
not recommended(5)(6)
suitable
SSOP, TSSOP, VSO, VSSOP
not recommended(7)
suitable
not suitable
相關PDF資料 |
PDF描述 |
|---|---|
| TDA8777HL/33 | PARALLEL, WORD INPUT LOADING, 10-BIT DAC, PQFP48 |
| TDA8785HGPB | 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP44 |
| TDA8785HGP | 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP44 |
| TDA8786-T | SPECIALTY ANALOG CIRCUIT, PQFP48 |
| TDA8786G-T | SPECIALTY ANALOG CIRCUIT, PQFP48 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA8779 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:10-bit converter interface ADC/DAC for quadrature transceiver |
| TDA8779H | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:10-bit converter interface ADC/DAC for quadrature transceiver |
| TDA8780M | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:True logarithmic amplifier |
| TDA8781 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| TDA8783 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:40 Msps, 10-bit analog-to-digital interface for CCD cameras |
發(fā)布緊急采購，3分鐘左右您將得到回復。