- 您現在的位置：買賣IC網 > PDF目錄380765 > STLC2150 (意法半導體) BLUETOOTH RADIO TRANSCEIVER PDF資料下載
參數資料
| 型號： | STLC2150 |
| 廠商： | 意法半導體 |
| 英文描述： | BLUETOOTH RADIO TRANSCEIVER |
| 中文描述： | 藍牙無線電收發器 |
| 文件頁數： | 5/10頁 |
| 文件大小： | 191K |
| 代理商： | STLC2150 |
5/10
STLC2150
FUNCTIONAL DESCRIPTION
Receiver
The STLC2150 implements a low-IF receiver for
Bluetooth
modulated input signals. The radio signal is taken
from 75
balanced RF input and amplified by an LNA.
The mixers are driven by two quadrature signals which are locally generated from a VCO signal running at
twice the frequency. The output signals in the I signal path and Q signal path are bandpass filtered by a
polyphase bandpass filter for channel filtering and image rejection. The output of the lowpass filters is amplified
by a VGA to the optimal input range for the A/D converters.
Further filtering is done in digital filters. The digital part demodulates the GFSK coded bit stream by evaluating
the phase information in the I and Q signals.
The digital part recovers the receive bit clock. It extracts RSSI data by calculating the signal strength. Overall
automatic gain amplification in the receive path is controlled by the digital part.
Transmitter
The transmitter takes the serial input transmit data from the base-band. This data is GFSK modulated to I and
Q signals. The Tx bit clock is provided to the base-band for synchronization.
The output of the digital part is converted to analogue signals which are lowpass filtered before being sent to
direct up-conversion mixers.
The quadrature up-conversion mixers use the same LO as the receiver. 0dBm output power at the antenna port
is achieved with an internal PA, which has 75
balanced RF output. Optional power control is available.
PLL
The on-chip VCO is part of a PLL, the frequency is programmed for the RF channels by the digital part. The tank
resonator circuitry for the VCO is completely integrated.
Process variations on the VCO center frequency are calibrated out automatically. Also the RC time constants
for the analogue lowpass filters are automatically calibrated on chip.
Base-band interface
Unidirectional BlueRF compatible interface is used to control all functions of radio transceiver.
The unidirectional RXMODE2 is supported. STLC2150 has also the capability to provide the recovered clock
and the aligned data to the base-band (Rxmode2+). 4 wires serial JTAG interface is used to access the internal
registers. Also JTAG is used to set channel number and read RSSI.
Crystal oscillator
The STLC2150 has a crystal oscillator to generate 13 MHz reference clock for internal use and for the base-
band chip.
Also a 3.2 or 32 kHz clock for low power modes operation can be provided.
相關PDF資料 |
PDF描述 |
|---|---|
| STLC2415 | BLUETOOTH BASEBAND WITH INTEGRATED FLASH |
| STLC2500 | BLUETOOTH⑩ SINGLE CHIP |
| STLC3055 | WLL & ISDN-TA SUBSCRIBER LINE INTERFACE CIRCUIT |
| STLC3055Q | WLL & ISDN-TA SUBSCRIBER LINE INTERFACE CIRCUIT |
| STLC3055QTR | WLL & ISDN-TA SUBSCRIBER LINE INTERFACE CIRCUIT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| STLC2410 | 功能描述:電信集成電路 Bluetooth Baseband RoHS:否 制造商:STMicroelectronics 類型:Telecom IC - Various 工作電源電壓:4.75 V to 5.25 V 電源電流: 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PQFP-100 封裝:Tray |
| STLC2410B | 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:BLUETOOTH BASEBAND |
| STLC2411 | 制造商:STMicroelectronics 功能描述:BLUETOOTH CLS I 1.55V TO 1.95V 0.721MBPS 132TFBGA - Trays |
| STLC2415 | 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:BLUETOOTH BASEBAND WITH INTEGRATED FLASH |
| STLC2416 | 制造商:STMicroelectronics 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。