參數資料
型號: SC16C654BIBM
廠商: NXP Semiconductors N.V.
元件分類: 收發器
英文描述: 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
封裝: SC16C654BIA68<SOT188-2 (PLCC68)|<<http://www.nxp.com/packages/SOT188-2.html<1<Always Pb-free,;SC16C654BIA68<SOT188-2 (PLCC68)|<<http://www.nxp.com/packages/SOT188-2.html&
文件頁數: 17/58頁
文件大小: 302K
代理商: SC16C654BIBM
9397 750 14965
Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 20 June 2005
17 of 58
Philips Semiconductors
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
6.2 Internal registers
The SC16C654B/654DB provides 17 internal registers for monitoring and control. These
registers are shown in
Table 5
. Twelve registers are similar to those already available in
the standard 16C554. These registers function as data holding registers (THR/RHR),
interrupt status and control registers (IER/ISR), a FIFO control register (FCR), line status
and control registers (LCR/LSR), modem status and control registers (MCR/MSR),
programmable data rate (clock) control registers (DLL/DLM), and a user accessible
scratchpad register (SPR). Beyond the general 16C554 features and capabilities, the
SC16C654B/654DB offers an enhanced feature register set (EFR, Xon/Xoff1-2) that
provides on-board hardware/software flow control. Register functions are more fully
described in the following paragraphs.
[1]
[2]
[3]
These registers are accessible only when LCR[7] is a logic 0.
These registers are accessible only when LCR[7] is a logic 1.
Enhanced Feature Register, Xon1, 2 and Xoff1, 2 are accessible only when the LCR is set to ‘BFh’.
6.3 FIFO operation
The 64-byte transmit and receive data FIFOs are enabled by the FIFO Control Register
(FCR) bit 0. With SC16C554 devices, the user can set the receive trigger level, but not the
transmit trigger level. The SC16C654B/654DB provides independent trigger levels for both
receiver and transmitter. To remain compatible with SC16C554, the transmit interrupt
trigger level is set to 8 following a reset. It should be noted that the user can set the
transmit trigger levels by writing to the FCR register, but activation will not take place until
EFR[4] is set to a logic 1. The receiver FIFO section includes a time-out function to ensure
data is delivered to the external CPU. An interrupt is generated whenever the Receive
Table 5:
A2
General register set (THR/RHR, IER/ISR, MCR/MSR, FCR, LSR, SPR)
[1]
0
0
0
Receive Holding Register
0
0
1
Interrupt Enable Register
0
1
0
Interrupt Status Register
0
1
1
Line Control Register
1
0
0
Modem Control Register
1
0
1
Line Status Register
1
1
0
Modem Status Register
1
1
1
Scratchpad Register
Baud rate register set (DLL/DLM)
[2]
0
0
0
LSB of Divisor Latch
0
0
1
MSB of Divisor Latch
Enhanced register set (EFR, Xon/off 1-2)
[3]
0
1
0
Enhanced Feature Register
1
0
0
Xon1 word
1
0
1
Xon2 word
1
1
0
Xoff1 word
1
1
1
Xoff2 word
Internal registers decoding
A0
Read mode
A1
Write mode
Transmit Holding Register
Interrupt Enable Register
FIFO Control Register
Line Control Register
Modem Control Register
n/a
n/a
Scratchpad Register
LSB of Divisor Latch
MSB of Divisor Latch
Enhanced Feature Register
Xon1 word
Xon2 word
Xoff1 word
Xoff2 word
相關PDF資料
PDF描述
SC16C654BIBS 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
SC16C654DBIB64 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
SC16C750BIA44 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
SC16C750BIB64 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
SC16C750BIBS 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
相關代理商/技術參數
參數描述
SC16C654BIBM,128 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIBM,151 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIBM,157 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIBM151 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
SC16C654BIBM-F 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel