參數資料
型號： SC16C654BIA68
廠商： NXP Semiconductors N.V.
元件分類： 收發器
英文描述： 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
封裝： SC16C654BIA68<SOT188-2 (PLCC68)|<<http://www.nxp.com/packages/SOT188-2.html<1<Always Pb-free,;SC16C654BIA68<SOT188-2 (PLCC68)|<<http://www.nxp.com/packages/SOT188-2.html&
文件頁數： 15/58頁
文件大小： 302K
代理商： SC16C654BIA68
9397 750 14965
Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 20 June 2005
15 of 58
Philips Semiconductors
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
time. In addition, the four selectable levels of FIFO trigger interrupt and automatic
hardware/software flow control is uniquely provided for maximum data throughput
performance, especially when operating in a multi-channel environment. The combination
of the above greatly reduces the bandwidth requirement of the external controlling CPU,
increases performance, and reduces power consumption.
The SC16C654B/654DB combines the package interface modes of the 16C454/554 and
68C454/554 series on a single integrated chip. The 16 mode interface is designed to
operate with the Intel-type of microprocessor bus, while the 68 mode is intended to
operate with Motorola and other popular microprocessors. Following a reset, the
SC16C654B/654DB is downward compatible with the 16C454/554 or the 68C454/554,
dependent on the state of the interface mode selection pin, 16/68.
The SC16C654B/654DB is capable of operation to 1.5 Mbit/s with a 24 MHz crystal and
up to 5 Mbit/s with an external clock input (at 3.3 V and 5 V; at 2.5 V the max speed is
3 Mbit/s). With a crystal of 14.7464 MHz, and through a software option, the user can
select data rates up to 460.8 kbit/s or 921.6 kbit/s, 8 times faster than the 16C554.
The rich feature set of the SC16C654B/654DB is available through internal registers.
Automatic hardware/software flow control, selectable transmit and receive FIFO trigger
levels, selectable TX and RX baud rates, infrared encoder/decoder interface, modem
interface controls, and a sleep mode are all standard features. MCR[5] provides a facility
for turning off (Xon) software flow control with any incoming (RX) character. In the
16 mode, INTSEL and MCR[3] can be configured to provide a software controlled or
continuous interrupt capability. Due to pin limitations of the 64-pin package, this feature is
offered by two different LQFP64 packages. The SC16C654DB operates in the continuous
interrupt enable mode by bonding INTSEL to V
CC
internally. The SC16C654B operates in
conjunction with MCR[3] by bonding INTSEL to GND internally.
The PLCC68 SC16C654B package offers a clock select pin to allow system/board
designers to preset the default baud rate table. The CLKSEL pin selects the 1
×
or 4
×
pre-scalable baud rate generator table during initialization, but can be overridden following
initialization by MCR[7].
相關PDF資料
PDF描述
SC16C654B 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder
SC16C654BIB64 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
SC16C654BIBM 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
SC16C654BIBS 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
SC16C654DBIB64 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit-s (max.), with 64-byte FIFOs and infrared (IrDA) encoder-decoder
相關代理商/技術參數
參數描述
SC16C654BIA68,512 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIA68,518 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIA68,529 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654BIA68512 制造商:NXP Semiconductors 功能描述:IC QUAD UART FIFO 5MBPS 5.5V LCC-68
SC16C654BIA68-S 功能描述:UART 接口集成電路 16CB 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*