參數資料
型號： M68HC05M68H
廠商： Motorola, Inc.
英文描述： HCMOS Microcontroller Unit
中文描述： HCMOS微控制器
文件頁數： 98/130頁
文件大?。?/td> 1541K
代理商： M68HC05M68H
Central Processor Unit (CPU) Core
Advance Information
MC68HC705P6A
—
Rev. 2.0
98
Central Processor Unit (CPU) Core
MOTOROLA
12.3.5 Condition Code Register
The CCR shown in
Figure 12-1
is a 5-bit register in which four bits are
used to indicate the results of the instruction just executed. The fifth bit
is the interrupt mask. These bits can be individually tested by a program,
and specific actions can be taken as a result of their state. The condition
code register should be thought of as having three additional upper bits
that are always ones. Only the interrupt mask is affected by a reset of the
device. The following paragraphs explain the functions of the lower five
bits of the condition code register.
H
—
Half Carry Bit
When the half-carry bit is set, it means that a carry occurred between
bits 3 and 4 of the accumulator during the last ADD or ADC (add with
carry) operation. The half-carry bit is required for binary-coded
decimal (BCD) arithmetic operations.
I
—
Interrupt Mask Bit
When the interrupt mask is set, the internal and external interrupts are
disabled. Interrupts are enabled when the interrupt mask is cleared.
When an interrupt occurs, the interrupt mask is automatically set after
the CPU registers are saved on the stack, but before the interrupt
vector is fetched. If an interrupt request occurs while the interrupt
mask is set, the interrupt request is latched. Normally, the interrupt is
processed as soon as the interrupt mask is cleared.
A return from interrupt (RTI) instruction pulls the CPU registers from
the stack, restoring the interrupt mask to its state before the interrupt
was encountered. After any reset, the interrupt mask is set and can
only be cleared by the clear I bit (CLI), STOP, or WAIT instructions.
N
—
Negative Bit
The negative bit is set when the result of the last arithmetic operation,
logical operation, or data manipulation was negative. (Bit 7 of the
result was a logic one.)
The negative bit can also be used to check an often-tested flag by
assigning the flag to bit 7 of a register or memory location. Loading
the accumulator with the contents of that register or location then sets
or clears the negative bit according to the state of the flag.
相關PDF資料
PDF描述
M68HC11K 8-BIT MICROCONTROLLER
M68HC711CFD CONFIG REGISTER PROGRAMMING FOR EEPROM-BASED MHC MICROCONTROLLERS
M68HC711CFG CONFIG REGISTER PROGRAMMING FOR EEPROM-BASED MHC MICROCONTROLLERS
M68SDIL12 The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit
M68ADP912DG128PV The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit
相關代理商/技術參數
參數描述
M68HC08 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Microcontrollers
M68HC08M6 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HCMOS Microcontroller Unit
M68HC08M68H 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HCMOS Microcontroller Unit
M68HC11 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:CONFIG Register Programming for EEPROM-based M68HC11 Microcontrollers
M68HC11_03 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:8-channel, 8-bit analog-to-digital (A/D) converter
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*