參數資料
型號: ISO15693
廠商: Fujitsu Limited
英文描述: High-speed RFID LSI FerVID family
中文描述: 高速大規模集成電路的RFID書中家庭
文件頁數: 38/45頁
文件大?。?/td> 257K
代理商: ISO15693
MB89R118
38
(2) When Error_flag not set
SOF
8 bits (“00
H
”)
3-8. Fast Write Multiple Blocks Command
Description of command
The Fast Write Multiple Blocks command is the same as the Write Multiple Blocks command that writes the
successive multiple-block data included in the request. The datarate in the response is twice as defined in ISO/
IEC 15693.
Up to 2 blocks of data can be written for one request.
The transponder performs verification after writing and returns an error code if the writing has failed. Up to 2
blocks of data can be written for one request. The number of blocks specified in the Fast Write Multiple Blocks
command is similar to the number of blocks specified in the Read Multiple Blocks command. The value of the
number of blocks field specified in the Fast Write Multiple Blocks command is obtained by subtracting 1 from
the number of the expected blocks to be written.
Setting the number of blocks to “01
H
” makes a request to write 2 blocks. Setting the number of blocks to “00
H
makes a request to write 1 block (the request having the same effect as the Fast Write Single Block command).
If at least one of the blocks specified for data writing is locked, the transponder does not write any data and,
instead, returns an error code.
If the Option_flag (bit 7) is “0”, the transponder shall return its response when it has completed the write operation
starting after <t1nom
+
a multiple of 4096/fc (302.1
μ
s)> with total tolerance of
32/fc to
+
32/fc (2.4
μ
s) and
latest within 20 ms. If it is “1”, transponder shall wait for the reception of an EOF from the reader/writer and upon
such reception still returns its response. (However, if an EOF is not sent within 38 ms, the time-out occurs and
the transponder can receive another command.)
Command
[Request from the reader/writer to the transponder]
Command
(Fast Write
Multiple Blocks)
Response
[Response from the transponder to the reader/writer]
(1) When Error_flag set
SOF
(2) When Error_flag not set
SOF
Flag
Block security status(option)
8 bits
Repeated as required
Data
64 bits
CRC
16 bits
EOF
SOF Flag
IC manufacturer
code
UID
(Addressed
mode)
First
block
number
Number
of blocks
Data
CRC
EOF
8 bits
8 bits (“C4
H
”)
8 bits (“08
H
”)
64 bits
8 bits
8 bits
Block length
(repeated as
required)
16 bits
Flag
Error code
8 bits
CRC
16 bits
EOF
8 bits (“01
H
”)
Flag
CRC
16 bits
EOF
8 bits (“00
H
”)
相關PDF資料
PDF描述
ISP321-1X HIGH DENSITY MOUNTING PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
ISP321-4X HIGH DENSITY MOUNTING PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
ISP321-2X HIGH DENSITY MOUNTING PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
ISP624-1 LOW INPUT CURRENT PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
ISP624-1X LOW INPUT CURRENT PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
相關代理商/技術參數
參數描述
ISO15DW 功能描述:RS-485接口IC Iso 3.3V Full & Half Duplex RS-485 Xcvr RoHS:否 制造商:Texas Instruments 數據速率:250 Kbps 工作電源電壓:3.3 V 電源電流:750 uA 工作溫度范圍:- 40 C to + 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube
ISO15DW 制造商:Texas Instruments 功能描述:Digital Isolator IC 制造商:Texas Instruments 功能描述:IC, RS-485 TRANSCEIVER, 3.6V, SOIC-16
ISO15DWG4 功能描述:隔離器接口集成電路 Iso 3.3V Full & Half Duplex RS-485 Xcvr RoHS:否 制造商:Texas Instruments 通道數量:2 傳播延遲時間: 電源電壓-最大:5.5 V 電源電壓-最小:3 V 電源電流:3.6 mA 功率耗散: 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:SOIC-8 封裝:Tube
ISO15DWR 功能描述:隔離器接口集成電路 Iso 3.3V Full & Half Duplex RS-485 Xcvr RoHS:否 制造商:Texas Instruments 通道數量:2 傳播延遲時間: 電源電壓-最大:5.5 V 電源電壓-最小:3 V 電源電流:3.6 mA 功率耗散: 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:SOIC-8 封裝:Tube
ISO15DWRG4 功能描述:隔離器接口集成電路 Iso 3.3V Full & Half Duplex RS-485 Xcvr RoHS:否 制造商:Texas Instruments 通道數量:2 傳播延遲時間: 電源電壓-最大:5.5 V 電源電壓-最小:3 V 電源電流:3.6 mA 功率耗散: 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:SOIC-8 封裝:Tube