參數資料
型號： IC42S16160-7TIG
英文描述： 4M x 16Bit x 4 Banks (256-MBIT) SDRAM
中文描述： 4米× 16 × 4銀行（256兆）內存
文件頁數： 21/69頁
文件大小： 1219K
代理商： IC42S16160-7TIG
IC42S16160
Integrated Circuit Solution Inc.
DR037-0A 9/05/2003
21
Auto Precharge
During a read or write command cycle, A10 controls whether auto precharge is selected. If A10 is high in the read or write
command (Read with Auto precharge command or Write with Auto precharge command), auto precharge is selected and
begins automatically.
In the write cycle, t
DAL
(min.) must be satisfied before asserting the next activate command to the bank being precharged.
When using auto precharge in the read cycle, knowing when the precharge starts is important because the next activate
command to the bank being precharged cannot be executed until the precharge cycle ends. Once auto precharge has
started, an activate command to the bank can be asserted after t
RP
has been satisfied.
A Read or Write command without auto - precharge can be terminated in the midst of a burst operation. However, a Read
or Write command with auto - precharge can not be interrupted by the same bank commands before the entire burst opera-
tion is completed. Therefore use of the same bank Read, Write, Precharge or Burst Stop command is prohibited during a
read or write cycle with auto - precharge. It should be noted that the device will not respond to the Auto - Precharge com-
mand if the device is programmed for full page burst read or write cycles.
The timing when the auto precharge cycle begins depends both on both the
CAS
Iatency programmed into the mode reg-
ister and whether the cycle is read or write.
Read with Auto Precharge
During a READA cycle, the auto precharge begins one clock earlier (CL = 2) or two clocks earlier (CL = 3) than the last word
output.
READ with AUTO PRECHARGE
Burst lengh = 4
CLK
Command
CAS latency = 2
DQ
Command
CAS latency = 3
DQ
Remark READA means READ with AUTO PRECHARGE
Hi - Z
Auto precharge starts
QB0
QB3
QB2
QB1
READA B
READA B
T0
T1
T2
T3
T4
T5
T6
T7
Auto precharge starts
Hi - Z
T8
QB0
QB3
QB2
QB1
No New Command to Bank B
No New Command to Bank B
相關PDF資料
PDF描述
IC43R16160 4M x 16 Bit x 4 Banks (256-MBIT) DDR SDRAM
IC43R16160-5T 4M x 16 Bit x 4 Banks (256-MBIT) DDR SDRAM
IC43R16160-5TG 4M x 16 Bit x 4 Banks (256-MBIT) DDR SDRAM
IC43R16160-6T 4M x 16 Bit x 4 Banks (256-MBIT) DDR SDRAM
IC43R16160-6TG 4M x 16 Bit x 4 Banks (256-MBIT) DDR SDRAM
相關代理商/技術參數
參數描述
IC42S16160B-7TL 制造商:ISSI 制造商全稱:Integrated Silicon Solution, Inc 功能描述:256-MBIT SYNCHRONOUS DRAM
IC42S16400 制造商:ICSI 制造商全稱:Integrated Circuit Solution Inc 功能描述:1M x 16Bit x 4 Banks (64-MBIT) SDRAM
IC42S16400-6BG 制造商:ICSI 制造商全稱:Integrated Circuit Solution Inc 功能描述:1M x 16Bit x 4 Banks (64-MBIT) SDRAM
IC42S16400-6BIG 制造商:ICSI 制造商全稱:Integrated Circuit Solution Inc 功能描述:1M x 16Bit x 4 Banks (64-MBIT) SDRAM
IC42S16400-6T 制造商:ICSI 制造商全稱:Integrated Circuit Solution Inc 功能描述:1M x 16Bit x 4 Banks (64-MBIT) SDRAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*