參數資料
型號： HTMS8001FUG
廠商： NXP Semiconductors N.V.
元件分類： 通信及網絡
英文描述： HITAG ?; Transponder IC
封裝： HTMS1001FTB/AF<sot1122 (XSON3)|<<http://www.nxp.com/packages/sot1122.html<1<Always Pb-free,;HTMS1001FTK/AF<SOT899-1 (HVSON2)|<<http://www.nxp.com/packages/SOT899-1.html&l
文件頁數： 13/58頁
文件大?。?/td> 844K
代理商： HTMS8001FUG
152931
NXP B.V. 2010. All rights reserved.
Product data sheet
PUBLIC
Rev. 3.1 — 21 January 2010
152931
13 of 58
NXP Semiconductors
HITAG μ
Transponder IC
8.
General requirements
The HITAG
μ
transponder ICs are compatible with ISO 11785. At the time a HITAG
μ
transponder IC is in the interrogator field it will respond according to ISO 11785.
A HITAG
μ
advanced/advanced+ can be identified as a transponder being in the data
exchange mode (advanced mode) by the type information in the reserved bit field sent to
the RWD.
Bit 15 of the ISO 11784 frame shall be set to ’1’ indicating that this is an HITAG μ
advanced/advanced+ in data exchange mode.
Bit 16 of the ISO 11784 frame (additional data flag set to ’1’, indicating that the
HITAG μ advanced/advanced+ in data exchange mode contains additional data in the
user memory area.
To bring the HITAG μ transponder ICs into the data exchange mode, the RWD needs to
send a valid request or a valid switch command within the defined listening window.
A HITAG μ transponder IC in data exchange mode only responds when requested by the
RWD (RTF mode).
The identification code, all communication from reader to HITAG μ transponder ICs and
vice versa and the CRC error detection bits (if applicable) are transmitted starting with
LSB first.
In the case that multiple HITAG μ advanced/advanced+ in data exchange mode are in the
interrogation field which cause collisions the RWD has to start the anticollision procedure
as described in this document. Depending in which part of the ISO 11785 timing frame the
collision is detected the RWD will start with the anticollision request.
The HITAG
μ
transponder IC in data exchange mode switches back to the standard
ISO 11785 mode when it :
is no longer in the interrogation field
has terminated the data exchange mode operations and the interrogation field was
switched off for at least 5 ms afterwards
9.
HITAG
μ
transponder IC air interface
9.1 Downlink description
To transfer the HITAG μ transponder ICs into the data exchange mode, the RWD's
interrogation field needs be switched off. After this off-period, the interrogation field is
switched on again, and either the SOF at the start of a valid request or the special switch
command needs to be sent to the HITAG μ transponder IC within the specified switch time
window. The HITAG μ transponder IC switches itself into the data exchange mode upon
reception of any of the switch commands. In this mode, the HITAG μ transponder IC
respond when requested by the RWD (reader driven protocol).
The HITAG μ transponder IC in data exchange mode switches back to the ISO 11785
mode after the interrogation field has been switched off for at least 5 ms.
相關PDF資料
PDF描述
HTMS8101FTB HITAG ?; Transponder IC
HTMS8101FTK HITAG ?; Transponder IC
HTMS8101FUG HITAG ?; Transponder IC
HTMS8201FTB HITAG ?; Transponder IC
HTMS8201FTK HITAG ?; Transponder IC
相關代理商/技術參數
參數描述
HTMS8001FUG/AM,005 功能描述:RFID應答器 Smart Label/Tag Ics RoHS:否 制造商:Murata 存儲容量:512 bit 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel
HTMS8101FTB/AF,115 功能描述:RFID應答器 RFID HTAG ADVANCED RoHS:否 制造商:Murata 存儲容量:512 bit 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel
HTMS8101FTB/AF115 制造商:NXP Semiconductors 功能描述:LF TAG IC 512BIT 280PF SOT1122
HTMS8101FTK/AF,115 功能描述:RFID應答器 125KHz XSPON MOD-ASK RoHS:否 制造商:Murata 存儲容量:512 bit 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel
HTMS8101FTK/AF115 制造商:NXP Semiconductors 功能描述:LF TAG IC 512BIT 280PF HVSON2
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*