- 您現在的位置：買賣IC網 > PDF目錄384400 > HEF4047BP (NXP Semiconductors N.V.) Monostable-astable multivibrator PDF資料下載
參數資料
| 型號： | HEF4047BP |
| 廠商： | NXP Semiconductors N.V. |
| 元件分類： | 振蕩器 |
| 英文描述： | Monostable-astable multivibrator |
| 封裝： | HEF4047BP<SOT27-1 (DIP14)|<<http://www.nxp.com/packages/SOT27-1.html<1<Always Pb-free,;HEF4047BT<SOT108-1 (SO14)|<<http://www.nxp.com/packages/SOT108-1.html<1<week |
| 文件頁數： | 3/15頁 |
| 文件大?。?/td> | 274K |
| 代理商： | HEF4047BP |
January 1995
3
Philips Semiconductors
Product specification
Monostable/astable multivibrator
HEF4047B
MSI
Astable operation is enabled by a HIGH level on the
ASTABLE input. The period of the square wave at O and
O outputs is a function of the external components
employed. ‘True’ input pulses on the ASTABLE or
‘complement’ pulses on the ASTABLE input, allow the
circuit to be used as a gatable multivibrator. The
OSCILLATOR OUTPUT period will be half of the O output
in the astable mode. However, a 50% duty factor is not
guaranteed at this output.
In the monostable mode, positive edge-triggering is
accomplished by applying a leading-edge pulse to the
+ TRIGGER input and a LOW level to the
TRIGGER
input. For negative edge-triggering, a trailing-edge pulse is
applied to the
TRIGGER and a HIGH level to the
+ TRIGGER. Input pulses may be of any duration relative
to the output pulse. The multivibrator can be retriggered
(on the leading-edge only) by applying a common pulse to
both the RETRIGGER and + TRIGGER inputs. In this
mode the output pulse remains HIGH as long as the input
pulse period is shorter than the period determined by the
RC components.
An external count down option can be implemented by
coupling O to an external ‘N’ counter and resetting the
counter with the trigger pulse. The counter output pulse is
fed back to the ASTABLE input and has a duration equal
to N times the period of the multivibrator. A HIGH level on
the MR input assures no output pulse during an ON-power
condition. This input can also be activated to terminate the
output pulse at any time. In the monostable mode, a HIGH
level or power-ON reset pulse must be applied to MR,
whenever V
DD
is applied.
Fig.2 Pinning diagram.
HEF4047BP(N):
14-lead DIL; plastic
(SOT27-1)
14-lead DIL; ceramic (cerdip)
(SOT73)
14-lead SO; plastic
(SOT108-1)
HEF4047BD(F):
HEF4047BT(D):
( ): Package Designator North America
相關PDF資料 |
PDF描述 |
|---|---|
| HEF4047BT | Monostable-astable multivibrator |
| HEF4049BP | Hex inverting buffers |
| HEF4049BT | Hex inverting buffers |
| HEF4050BT | Hex non-inverting buffers |
| HEF4050BP | Hex non-inverting buffers |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HEF4047BP,652 | 功能描述:單穩態多諧振蕩器 MONO/ASTBL MLTVIBRTR RoHS:否 制造商:Texas Instruments 每芯片元件:1 邏輯系列:LVC 邏輯類型:Monostable Multivibrator 封裝 / 箱體:SSOP-8 傳播延遲時間:18.6 ns 高電平輸出電流:- 32 mA 低電平輸出電流:32 mA 電源電壓-最大:5.5 V 電源電壓-最小:1.65 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
| HEF4047BP652 | 制造商:NXP Semiconductors 功能描述:IC MONOSTABLE / ASTABLE MULTIVIBRATOR |
| HEF4047BPN | 制造商:PHI 功能描述:4047 |
| HEF4047BT | 制造商:NXP Semiconductors 功能描述:HEF4000 Monostable/Astable Multivibrator Bulk 制造商:NXP Semiconductors 功能描述:IC 4000 LOCMOS SMD 4047 SOIC14 制造商:NXP Semiconductors 功能描述:IC, 4000 LOCMOS, SMD, 4047, SOIC14 制造商:NXP Semiconductors 功能描述:IC, 4000 LOCMOS, SMD, 4047, SOIC14; Multivibrator Type:Monostable / Astable; Output Current:2.4mA; Propagation Delay:50ns; Logic Case Style:SOIC; No. of Pins:14; Supply Voltage Min:4.5V; Supply Voltage Max:15.5V; Operating ;RoHS Compliant: Yes |
| HEF4047BT,652 | 功能描述:單穩態多諧振蕩器 MONO/ASTBL MLTVIBRTR RoHS:否 制造商:Texas Instruments 每芯片元件:1 邏輯系列:LVC 邏輯類型:Monostable Multivibrator 封裝 / 箱體:SSOP-8 傳播延遲時間:18.6 ns 高電平輸出電流:- 32 mA 低電平輸出電流:32 mA 電源電壓-最大:5.5 V 電源電壓-最小:1.65 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。