| 品牌 | 臺灣松翰 | 型號 | sn8p2711a |
| 批號 | 09+ | 封裝 | sop-14 |
| 營銷方式 | 直銷 | 產品性質 | 熱銷 |
| 工藝 | 半導體集成 | 工作溫度 | 0~70（℃） |
松翰(sonix):sn8p2501b/sn8p2602b /sn8p2622 /sn8p2611/sn8p2612/
sn8p2613/sn8p2604a /sn8p2624 /sn8p2606 /sn8p2608/
sn8p2614/sn8p2704a/sn8p2705a/sn8p2706a/sn8p2707a/
sn8p2708a/sn8p2711/sn8p2714/sn8p2715/sn8p27142/
sn8p27143/sn8p2722/sn8p2808/sn8p2308/sn8p26l32/
sn8p26l321/sn8p26l34/sn8p26l38
·memory configuration
otp rom size: 1k * 16 bits.
ram size: 64 * 8 bits.
·four levels stack buffer.
·i/o pin configuration
bi-directional: p0, p4, p5.
input only: p0.4 shared with reset pin.
wakeup: p0 level change trigger
pull-up resisters: p0, p4, p5.
external interrupt trigger edge:
p0.0 controlled by pedge register.
p0.1 is falling edge trigger only.
·3-level lvd.
reset system and power monitor.
·four interrupt sources
two internal interrupts: t0, tc1.adc
two external interrupts: int0, int1.
·powerful instructions
one clocks per instruction cycle (1t)
most of instructions are one cycle only.
all rom area jmp instruction.
all rom area call address instruction.
all rom area lookup table function (movc)
·5+1 channel 12-bit adc.
five external adc input
one internal battery measurement
internal ad reference voltage (vdd, 4v, 3v ,2v).
·two 8-bit timer/counter
tc0: auto-reload timer/counter/pwm0/buzzer output.
tc1: auto-reload timer counter/pwm1/buzzer output
·on chip watchdog timer and clock source is internal
low clock rc type (16khz @3v, 32khz @5v).
·dual system clocks
external high clock: rc type up to 10 mhz
external high clock: crystal type up to 16 mhz
internal high clock: 16mhz rc type.
internal low clock: rc type 16khz(3v), 32khz(5v)
·operating modes
normal mode: both high and low clock active
slow mode: low clock only
sleep mode: both high and low clock stop
green mode: periodical wakeup by t0 timer
·package (chip form support)
p-dip 14 pins
sop 14 pins
ssop 16 pins