| Model / 型號 | NPN D.on | OAP-2008-NK | OAP-2008S-NK | OAP-2016-NK | OAP-2016S-NK |
| PNP D.on | OAP-2008-PK | OAP-2008S-PK | OAP-2016-PK | OAP-2016S-PK |
| Sensing type / 檢出方式 | Through beam / 對照式 |
| Resolution / 分辨率 | 30 mm opaque object 不透明物體 |
| Sensing distance / 檢出距離 | 0.6 M ～ 5 M | 0.3 M ～ 2 M | 0.9 M ～ 5 M | 0.5 M ～ 2 M |
| Sensing Height / 檢測高度 | 140 mm | 300 mm |
| Emitting light / 發光源 | Infrared LED(紅外線發光LED)：850 nm |
| No.of Beams/光軸數 | 8 | 16 |
| Beam pitch / 光軸間距 | 20 mm |
| Indicating LED / LED指示燈 | 5 LEDs each on emitter and receiver. | 7LEDs each on emitter and receiver. |
| LEDs blink from top to bottom under the normal emission. All LEDs light up under the emitting circuit failure and will become blinking until the normal emission. |
| Running type / 運轉方式 | More than a beam is covered ON﹙Dark On﹚任意一個光束被遮斷即輸出 |
| Operating voltage / 工作電壓 | DC12 ~ 24 V±10% (ripple P-P：10% Max.) |
| Current Consumption / 消耗電流 | Transmitter：90 mA Max. | Transmitter：135 mA Max. |
| Receiver：35 mA Max. | Receiver：70 mA Max. |
| Load current / 負載電流 | 100 mA Max at DC 24V |
| Protection circuit / 保護電路 | Reversed Supply circuit protection, Short circuit protection output電源反接保護及輸出短路保護 |
| Response time / 反應時間 | Off to On：15 ms Max. |
| On to Off：20 ms Max. |
| Insulation resistance / 隔離阻抗 | 20MΩ min. (DC500V) |
| Voltage withstandabiligy / 絕緣耐壓 | AC1000V 60Hz for 60 Sec. |
| Operating temperature/工作溫度 | - 10 ℃ ~ + 45℃ ﹙No freezing allowed不可結霜,結冰﹚ |
| Ambient humidity / 工作溼度 | 35% ~ 85% RH 相對溼度 |
| Storage temperature / 儲存時溫度 | - 10 ℃ ~ + 45℃ ﹙No freezing allowed不可結霜,結冰﹚ |
| Storage humidity / 儲存時溼度 | 35% ~ 95% RH 相對溼度 |
| Protection degree / 防水等級 | IP62 |
| Material / 外觀材質 | ABS |
| Wiring method / 出線方式 | Transmitter：M12 pigtailed type(5P) / M12接頭15cm電線式 |
| Receiver：M12 pigtailed type(5P) / M12接頭15cm電線式 |
| Weight /重量 | Approx.200g | Approx.253g |