參數資料
型號: A5348CA
廠商: Allegro MicroSystems, Inc.
英文描述: SMOKE DETECTOR WITH INTERCONNECT AND TIMER
中文描述: 煙霧報警器與互連和定時器
文件頁數: 4/8頁
文件大?。?/td> 90K
代理商: A5348CA
5348
SMOKE DETECTOR
with INTERCONNECT
and TIMER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Limits
Characteristic
Pin
Test Conditions
Min.
Typ.
Max.
Units
ELECTRICAL CHARACTERISTICS continued
Timer Out Output Current
4
V
OUT
= 0.5 V
V
DD
= 7.2 V, V
OUT
= 1.0 V
500
μ
A
LED Output ON Current
5
10
mA
LED Output ON Time
5
8.0
10
12
ms
LED Output OFF Time
5
No Alarm, In Standby
32
40
48
s
No Alarm, Timer Mode After Pin 1
High-to-Low
8.0
10
12
s
I/O Current
2
No Alarm, V
I/O
= V
DD
- 2.0 V
Alarm, V
I/O
= V
DD
- 2.0 V
External “Alarm” In
25
60
μ
A
-7.5
mA
I/O Alarm Voltage
2
3.0
V
I/O Delay
2
“Alarm” Out
3.0
s
Supply Current
6
V
DD
= 9.0 V, No Alarm, No Loads
V
DD
= 12 V, No Alarm, No Loads
5.0
9.0
μ
A
12
μ
A
Test
NOTE 1: Negative current is defined as coming out of (sourcing) the specified device pin.
NOTE 2: Alarm (Smoke) Condition is defined as V
15
< V
13
; No Alarm (No Smoke) Condition as V
15
> V
13
.
CIRCUIT DESCRIPTION
The A5348CA is a low-current CMOS circuit
providing all of the required features for an
ionization-type smoke detector.
Oscillator. An internal oscillator operates
with a period of 1.67 seconds during no-
smoke conditions. Every 1.67 seconds,
internal power is applied to the entire circuit
and a check is made for smoke. Every 24
clock cycles (40 seconds), the LED is pulsed
and a check is made for low battery by
comparing V
DD
to an internal reference.
Since very-low currents are used in the
device, the oscillator capacitor at pin 12
should be a low-leakage type (PTFE, polysty-
rene, or polypropylene).
Detector Circuitry.
When smoke is detected, the resistor divider
network that sets the sensitivity (smoke trip point) is altered to increase
the sensitivity set voltage (pin 13) by typically 130 mV with no exter-
nal connections to pins 3 or 13. This provides hysteresis and reduces
false triggering. An active guard is provided on both pins adjacent to
the detector input (pin 15). The voltage at pins 14 and 16 will be
within 100 mV of the input. This will keep surface leakage currents to
a minimum and provide a method of measuring the input voltage
without loading the ionization chamber. The active guard amplifier is
not power strobed and thus provides constant protection from surface
leakage currents. The detector input has internal diode protection
against static damage.
Alarm Circuitry.
If smoke is detected, the oscillator period changes
to 40 ms and the horn is enabled. The horn output is typically 160 ms
ON, 80 ms OFF. During the OFF time, smoke is again checked and
will inhibit further alarm output if smoke is not sensed. During smoke
conditions the low battery alarm is inhibited and the LED is driven at a
1 Hz rate.
相關PDF資料
PDF描述
A5349CA AC SMOKE DETECTOR WITH INTERCONNECT AND TIMER
A5350CA SMOKE DETECTOR WITH INTERCONNECT
A5354CA SMOKE DETECTOR WITH INTERCONNECT
A5355CA SMOKE DETECTOR WITH INTERCONNECT
A5358CA PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT AND TIMER
相關代理商/技術參數
參數描述
A5348CA-T 功能描述:IC SMOKE DETECTOR ION 16-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - 傳感器和探測器接口 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:74 系列:- 類型:觸控式傳感器 輸入類型:數字 輸出類型:數字 接口:JTAG,串行 電流 - 電源:100µA 安裝類型:表面貼裝 封裝/外殼:20-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:20-TSSOP 包裝:管件
A5349CA 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:AC SMOKE DETECTOR WITH INTERCONNECT AND TIMER
A53506 制造商:n/a 功能描述:Ships in 2 days
A5350CA 功能描述:IC SMOKE DETECTOR ION 16-DIP RoHS:否 類別:集成電路 (IC) >> 接口 - 傳感器和探測器接口 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:74 系列:- 類型:觸控式傳感器 輸入類型:數字 輸出類型:數字 接口:JTAG,串行 電流 - 電源:100µA 安裝類型:表面貼裝 封裝/外殼:20-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:20-TSSOP 包裝:管件
A5350CA-T 功能描述:IC SMOKE DETECTOR ION 16-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - 傳感器和探測器接口 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:74 系列:- 類型:觸控式傳感器 輸入類型:數字 輸出類型:數字 接口:JTAG,串行 電流 - 電源:100µA 安裝類型:表面貼裝 封裝/外殼:20-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:20-TSSOP 包裝:管件